Loading ...
Loading ...
Loading ...
Cycle Selector Advances Through Off
• Extra rinse is selected.
Fills with the Wrong Temperature Water
• Turn both faucets on fully.
• Make sure temperature selection is correct.
• If Auto Temperature Control is selected, cold water may feel warmer than cold water from the tap (see page 3).
• Make sure hoses are connected to correct faucets and inlet COlmections. Be sure water supply is regulated correctl):
Flush water lhle before fillh_g washer.
• Check the water heater. It should be set to deliver a mh_imum 120 ° F (49 ° C) hot water at the tap. Also check water
heater capacity and recovel T rate.
Disconnect hoses and clean screens. Hose filter screens may be plugged.
End of Cycle Chime Does Not Sound
• When Extended Spin (select models) is not selected, there may be a three-minute delay before chime sounds. This is
normal.
• End of Cycle Chime switch (select models) is set to Lo or Off.
For further assistance contact Maytag Services -''_,Maytag Customer Assistance:
U.S. 1-800-688-9900 or Canada 1-800-688-2002
U.S. customers using TTY for deaf, hearing impaired or speech impaired, call 1-800-688-2080.
NOTE: In our continuing effort to improve the quality of our appliances, it may be necessary to make changes to
the appliance without revising this guide.
10
Loading ...
Loading ...
Loading ...