Loading ...
Loading ...
Loading ...
ntenance and care
Brush roll and brush roll belt maintenance continued
Brush roll reset:
If larger debris becomes lodged in the foot of the
unit and the brush roll shuts off, turn the unit off
and remove the obstruction. Wait approximately
15 seconds for the motor to cool down before
turning back on. Brushwill function again after
allowing time to cool down.
Brush roll belt replacement:
If the brush roll belt should break, call
1-800-237-7691 or visit WWW.BISSELL.C©M
to purchase replacement belt.
Replacement instructions:
1. Turn power OFF (0). Remove foot
assembly from unit and turn over to access
the brush roll belt. 2.
eRemove three Phillips head screws to
remove the belt cover.
3. Locate broken belt.
4. Replace belt.
5. Place brush roll back into foot of unit.
6. Replace the belt cover and secure with
three screws.
3,
7. Attach foot assembly on unit.
Disposal of batteries
WARNING:
This product contains Nickel Metal Hydride (NiMH) rechargeable
batteries. Accordinc! to Federal and State regulations, removal
and proper disposaqof NiMH batteries is required. For removal
of the batteries in your Lift-Off Floor & More stick vacuum see
instructions below.
If your Lift-Off Floors & More stick vacuum
is to be disposed of, the batteries should be
removed and disposed of properly.
1. IMPORTANT: Unplug Charger.
2. Removehand vac from unitand remove
dirt cup from handle.
3,
5screws
3. Remove(5) Phillipshead screwson the
handle and cover.
8www. bis sell .com y_, 800.237.7691
Loading ...
Loading ...
Loading ...