Loading ...
Loading ...
Loading ...
10 11OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS (CONTINUED)
Using the timer
FUNCTION CONDITION OUTCOME AFTER THE TIME HAS ELAPSED
Automatic cut-out A heat setting is set
Acoustic signal
flashes Cooking zone
switches off
Countdown timer Cooking zones not in use
Acoustic signal
flashes
TIPS & INFORMATION
IMPORTANT
If a heat setting is set on this cooking zone in addition to
a countdown timer, the cooking zone is switched off after
the time set has elapsed.
STEP CONTROL PANEL DISPLAY
1
Touch
once
Pilot light of the first cooking zone flashes
2
Touch
once
Pilot light of the second cooking zone flashes
3
Touch
once
Pilot light of the third cooking zone flashes
(only for WHC643BD
/ WHI943BD)
4
Touch
once
Pilot light of the fourth cooking zone flashes (if
applicable)
TIPS & INFORMATION
IMPORTANT
If a cooking zone is switched off, the timer function set is
also switched off.
TIPS & INFORMATION
IMPORTANT
If the pilot light is flashing more slowly, the heat setting
can be set or modified.
TIPS & INFORMATION
IMPORTANT
If other timer functions are set, after a few seconds
the shortest remaining time of all the timer functions is
displayed and the corresponding pilot light flashes.
Setting the time
STEP CONTROL PANEL INDICATOR
1
Select
cooking zone
Pilot light for the cooking zone selected flashes
2
Touch
or
to minutes
After a few seconds the pilot light flashes more slowly.
The time is set.
The time counts down.
Switching off the timer function
STEP CONTROL PANEL INDICATOR
1
Select
cooking zone
Pilot light for the cooking zone selected flashes
2
Touch
The time remaining counts backwards to
After a few seconds the pilot light flashes more slowly.
The time is set.
The time counts down.
OPERATING INSTRUCTIONS
Changing the time
STEP CONTROL PANEL INDICATOR
1
Select
cooking zone
Pilot light of the selected cooking zone flashes faster. Time remaining is displayed
2
Touch
or
to minutes
After a few seconds the pilot light flashes more slowly.
The time is set.
The time counts down.
Displaying the time remaining for a cooking zone
CONTROL PANEL FIELD DISPLAY
Select cooking zone
Pilot light of the cooking zone selected flashes faster The time remaining is displayed
After a few seconds the pilot light flashes more slowly.
Switching off the acoustic signal
CONTROL PANEL FIELD DISPLAY
Touch
The acoustic signal to acknowledge.
The acoustic signal stops.
Automatic switch off
Cooking surface
• If after switching on the cooking surface, a heat
setting is not set for a cooking zone within approx. 10
seconds, the cooking surface automatically switches
itself off.
• If one or more sensor fields are covered by objects (a
pan, cloths, etc.) for longer than approx. 10 seconds,
a signal sounds and the cooking surface switches off
automatically.
• If all cooking zones are switched off, the cooking
surface automatically switches it- self off after approx.
10 seconds.
Control panel
When the appliance is switched off, if one or more of the
sensor fields on the control panel are covered for more
that 10 seconds, an acoustic signal sounds. The acoustic
signal switches itself off automatically when the sensor
fields are no longer covered.
Cooking zones
If one of the cooking zones is not switched off after a
certain time, or if the heat setting is not modified, the
relevant cooking zone switches off automatically.
is
displayed. Before being used again, the cooking zone
must be set to
.
HEAT SETTING SWITCHES OFF AFTER
, -
6 hours
-
5 hours
4 hours
-
1.5 hours
Hob²Hood
This is an advanced automatic function which connects
the hob to a special hood. Both the hob and the hood
have an infra-red signal communicator. Speed of the fan
is defined automatically on basis of mode setting and
temperature of the hottest cookware on the hob. You can
also operate the fan from the hob manually.
TIPS & INFORMATION
IMPORTANT
For most of the hoods the remote system is originally
deactivated. Activate it before you use the function. For
more information refer to hood user manual.
Operating the function automatically
The default automatic mode from the factory is H5.
You can change the automatic mode by following the
instructions below. When you activate the hob the hood
will adjust the fan speed automatically. Please note the
below table is a guide, the fan speed varies depending
on the temperature measured on the cooking zones of
the cooktop which can be affected by the heat setting(s)
selected as well as the size and volume of what you are
cooking.
TIPS & INFORMATION
IMPORTANT
The light on the hood deactivates 2 minutes after
deactivating the hob.
Activating the light
You can set the hob to activate the light automatically
whenever you activate the hob. To do so set the
automatic mode to H1 – H6.
TIPS & INFORMATION
IMPORTANT
The light on the hood deactivates 2 minutes after
deactivating the hob.
Loading ...
Loading ...
Loading ...