Loading ...
Loading ...
Loading ...
13
BDR-S13U-X
En
Installing the Drive
1
Turn off the power to the computer, and remove the power cable from the AC
socket.
2
Remove the blank panel on the front of the 5-1/4 inch slot.
3
Insert the drive into the slot.
4
If xing the drive is required, do so in accordance with the computer’s user
manual.
5
When installation is complete, remove the protective transparent lm on the
front surface of the drive (bezel). If removing the protective transparent lm
is not possible after installing in the PC housing, rst remove the protective
transparent lm before carefully inserting the drive into the computer slot.
• Usescrewsnomorethan6mm(15/64in.)inlength.Useoflongscrewsmaycause
damage to the drive.
• If the screws are not tightened fully, a rattling sound may be caused by vibration
from the rotation of the disc. Therefore, ensure that the drive is installed securely.
• The bottom surface of the product has a black sound dampening and dustproof
sheet attached. Use the drive without removing this sheet.
• MakesurethedriveisrmlysecuredwithinthePCbeforeuse.
• Connect cables to the device only after checking that the cables have not
deteriorated and are not damaged.
Loading ...
Loading ...
Loading ...