Loading ...
Loading ...
Loading ...
Functions and Characteristics
Copyright © Itech Electronic Co., Ltd. 22
How to understand 9*8
9*8: There are 8 groups; each group includes nine different memory locations.
The definition of group is as follows:
GRP1: means to Save/Reall parameters in memory location from 1 to 9.
Operation: Press (Shift) + (Save) + numeric keys 1to 9(
+numeric keys 1 to 9)
GRP2: means to Save/Reall parameters in memory location from 10 to 18.
GRP3-GRP8 is counted on the analogy of the same rule.
Timer setup (>TIMER SET)
TIMER SET item is used to enable or disable timer function.
If select ON, means to enable output Timer. Output will turn off after value set in
menu “Timer set” counted down to zero. Meanwhile, VFD will appear a mark of
“Timer”.
If select OFF, means to disable Timer function.
Factory default set is ON.
Reset to factory setting (>RESET)
RESET is used to return to the factory default setup.
If select YES, means to return to factory default setup.
If select NO, means to keep the current setup unchanged.
Factory default setup is as follows:
P-MEM=KEEP
P-OUT=OFF
COMM=RS232
CMD=SCPI
BEEP= ON
KNOB=ON
TRIG=MANU
MEM=GROUP1
TIMER=OFF
List Function (>List Set)
List mode allows you to create a sequence of steps, store it into the power
supply’s non volatile memory and execute it. The input parameters for
generating a list include the time unit (min or sec), the step voltage, step current,
step time and whether continue to the next step, repeat count and whether save
the file. Each list file can be edit up to 150 steps.
Once a trigger signal is received, the programmed list will be executed once.
Once finished, the instrument will pause until the next trigger signal is received.
Operation:
Generate file:five steps:
1. Press (Shift) + (Menu) into menu operation
2. VFD displays MAX VOLT, press to select LIST SET, press
Recall
Recall
I-setI-set
Enter
Loading ...
Loading ...
Loading ...