Loading ...
Loading ...
Loading ...
• Before using the wizard, make sure that the printer firmware is updated. For more information, see the
“Updating
firmware”
section.
1 From the control panel, navigate to Fax.
2 Select Set up now.
3 Type the fax name, and then select Next.
4 Enter the fax number and then select Done.
Using the Settings menu
1 From the control panel, navigate to Settings > Fax > Fax Setup > General Fax settings.
2 Configure the settings.
Using the Embedded Web Server
1 Open a web browser, and then type the printer IP address in the address field.
Notes:
• View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
• If you are using a proxy server, then temporarily disable it to load the web page correctly.
2 Click Settings > Fax > Fax Setup > General Fax Settings.
3 Configure the settings.
4 Apply the changes.
Setting up the fax function using etherFAX
Notes:
• The printer firmware must be updated to the latest version. For more information, see the “Updating
firmware” section.
• An appropriate license bundle must be installed in your printer. For more information, contact etherFAX.
• Make sure that you have registered your printer to the etherFAX portal. For more information, go to
https://www.etherfax.net/lexmark.
• The printer serial number is required on registration. To locate the serial number, see
“Finding the printer
serial number” on page 10.
1 Open a web browser, and then type the printer IP address in the address field.
Notes:
• View the printer IP address on the home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
• If you are using a proxy server, then temporarily disable it to load the web page correctly.
2 Click Settings > Fax > Fax Setup > General Fax Settings.
Note: Fax Setup appears only if Fax Mode is set to Fax.
3 In the Fax Name
field,
type a unique name.
Set up, install, and configure 26
Loading ...
Loading ...
Loading ...