Loading ...
Loading ...
Loading ...
5
www.linarie.com.au
3. TECHNICAL DATA SHEET
4. STRUCTURE ILLUSTRATION
5. TRANSPORT AND HANDING
Reference:
Rated voltage:
Ampere:
Rated frequency:
1. Ice compartment
2. Drip tray
3. Shelving
4. Bottle racks
5. Defrost button
When transportation, hold the base and lift the refrigerator carefully with an angle inferior at 45 degree.
1. Remove the top hinge cover.
2. Loosen the top hinge screws using Phillips head screw driver.
3. Adjust the door or put a spacer in between and then tighten the screws.
Never hold the door handle as support. Never place it upside down nor horizontally.
Push refrigerator on its basis and place it thanks to its roller feet.
Climate class:
Refrigerant:
Noise level:
Dimensions:
LK48MBRED/ LK48MBGREEN/
LK48MBBLACK/ LK48MBPINK
220-240V
0.6A
50Hz
SN/ N/ ST
R600a(18g)
<42db
Weight: 15kg
448(W) x 543(H) x 493(D)mm
6. DOOR ALIGNMENT
After cleaning you Retro mini fridge thoroughly, wipe the outside with a soft dry cloth, and the interior with a clean moist cloth.
Note: As the door gets pressed in during shipping, the gasket may have to be reset.
This is done to prevent the cooll refrigerated air from escaping. If there is a space between the door gasket and the cabinet,
set the gasket by gently pulling it out of the seal gap.
1. Insert the power supply.
2. Turn the thermostat dial to an initial setting of “7” for 15-20 minutes.
7. STARTING YOUR NEW RETRO MINI FRIDGE
Loading ...
Loading ...
Loading ...