Loading ...
Loading ...
Loading ...
34
USA
6.10 END OF PROGRAM
C
When the program you have
selected comes to an end, an
audible warning signal will warn
you to turn off your machine.
This audible signal will warn you
with certain intervals before it
turns off.
End of Program indicator will light up when
the washing program is over.
1. Open the door of the machine.
2. Press On/Off key to turn off your
machine.
3. Close the tap.
4. Unplug the machine from the socket.
C
For energy saving, the machine
is automatically turned off
following the completion of the
program or if the program is not
started.
C
Leave your dishes in the
machine for about 15 minutes
to allow them cool down after
they are washed. Your dishes
will dry in a shorter time if you
leave the door of your machine
ajar during this period. This
process will increase the drying
effectiveness of your machine.
6.11 WATER CUTOFF
WARNING
If mains water is cut or water inlet tap is
turned off the machine cannot take water
in and E:02 icon will flash on the program
indicator. As long as the problem continues,
washing program is paused and the water
inlet is checked regularly by the machine;
when the water is restored E:02 icon will
disappear after a while and the washing
program resumes.
6.12 OVERFLOWING
WARNING
If the machine intakes too much water or
there is leakage at any of the components
then the machine will detect this and E:01
icon will flash on the Program indicator. As
long as the overflowing continues safety
algorithm will be active and try to discharge
the water. If overflowing stops and safety
is assured, E:01 icon will disappear. If E:01
does not disappear, there is a permanent
fault. In this case the authorised service
should be contacted.
Adjustng the amount of rnse ad
1. After switching on your machine, press
the Menu key for 3 second.
C
In some models pressing the
Menu key only for once will
allow you to enter the Settings
menu.
2. Using <- and +> keys, proceed to “P:”
on the display.
3. Set to the appropriate level with the
Selection key.
4. Press the Menu key to exit the settings
menu. Your setting will be saved
automatically.
No rinse aid dispensed in P:0 wash position.
1 dose of rinse aid is dispensed in P:1
position.
2 doses of rinse aid are dispensed in P:2
position.
3 doses of rinse aid are dispensed in P:3
position.
4 doses of rinse aid are dispensed in P:4
position.
Loading ...
Loading ...
Loading ...