Loading ...
Loading ...
Loading ...
ABOUT SURFACE COOKING
(Z)
CAUTION
BEFORE COOKING
- Do not use the glass cooktop surface as a cutting Doara.
• Do not bRaceor store items that can melt or catcn fire on the glass COOKIOD.even
wnen t s not being usea.
Turn the surface units on on y after placing the cookware on them.
• Do not store heavy terns above the cooktop surface. They could fall and damage it.
©
CAUTIOi_
DURING COOKING
• Do not place aluminum foil or olast'c items sucn as salt ana pepper snaKers, spoon
nolaers, or plastic wrappings on the range wnen it is in use. The hot air from the vent
could melt olastics or ignite flammable items.
• Make sure the correct surface unit's turned on
- Never COOKa_rectly on the glass. Aiways use COOKware.
- Always place the Dan n the center of the surface unit you are COOKingon.
- Never eave surface units unattenaea wnue using a n_gn heat setting. Boilovers cause
smoKing and greasy spillovers that mat catch on fire.
- Turn the surface units off before removing cookware.
• Do not use DlaStlCwrap to cover food. Plastic may melt onto the surface and be vet',
difficult to remove.
AFTER COOKING
CAUTION
- Do not touch the surface units until they have coolea aown.
, The surface may be still be hot an_ burns ma_ occur if the jlass surface is toucnea
before it nas coo_ea aown suffciently.
• Immed_at÷y c_ean sp_ s on the cook_ng area to prevent a tougn c_ean_ngcnore ater.
- f cabinet storage is provided directly above the cooking surface, make sure that the
terns are infreauently usea ana can be safely stored _nan area sup ÷cted to heat
Temperatures ma,' be unsafe for items such as volatile I_cu_as c_eaners or aeroso
sprays.
About the radiant surface elements
The temperature rises gradually and evenly. As the temperature rises, the radiant element will glow
red. To maintain the selected setting, the element will cycle on and off. The heating element retains
enough heat to provide a uniform and consistent heat during the off cycle. For efficient cooking,
turn off the element several minutes before cooking is complete. This will allow residual heat to
complete the cooking process.
®
Radiant elements have a limiter that allows the element to cycle ON and OFF, even at the HI
setting. This helps to prevent damage to the ceramic cooktop. Cycling at the HI setting is
normal and can occur if the cookware is too small for the radiant element or if the cookware
bottom is not flat.
10 Surface cookng
Loading ...
Loading ...
Loading ...