Loading ...
Loading ...
Loading ...
---
Operation
Remove clean water tank. Insert handle into main body.
Line up the screw holes on
the handle and the main body.
Secure the handle in place
with one of the screws
provided.
Assembling your stick steam cleaner
Fit the body of the unit onto
the floor head, lining up the
screw hole.
Secure the floor head with
the remaining screw.
S2 Hard Floor Master User Guide v1.1.qxd:User guide 6/10/10 11:36 Page 4
Operation
Before you begin cleaning
WARNING: To reduce the risk of personal injury, unplug the steamer when assembling
the accessories.
Attaching the microfibre cleaning pad
Place the microfibre cleaning
pad over the floor head.
Tighten the drawstring so the
microfibre cleaning pad is
fitted securely.
WARNING: Never use the steam stick without the microfibre cleaning pad
correctly attached to the floor head.
IMPORTANT: Place the steamer on the resting tray whilst the steam is heating and when
the product is not moving continuously on the floor.
Remove the clean
water tank.
Twist the cap anti-
clockwise to remove.
Replace the clean water
tank, clicking into place
making sure the hard
water filter is in place.
WARNING: To reduce the risk of personal injury, unplug the steamer when assembling the unit.
S2 Hard Floor Master User Guide v1.1.qxd:User guide 6/10/10 11:36 Page 5
NOTE: In hard water areas, or to prevent calcium and mineral deposits from accumulating on the
heating element and mop head, you may use distilled or demineralized water in place of tap water.
Fill the tank with 500ml
(2 measuring jugs) of
water and replace the
water cap. Tighten by
twisting clockwise. Make
sure water levels do not
exceed the MAX fill line
on jug. DO NOT OVERFILL.
For best results, thoroughly sweep or vacuum floors prior to cleaning with the steam mop.
5
vax.com.au
Loading ...
Loading ...
Loading ...