Loading ...
Loading ...
Loading ...
RHHV1001 Revision 6
WALL MOUNTING
2. Feed the cable through the cable routing and then fit the
jack through the hole in the base of the bracket so that it
is firmly in place
3. Select a suitable installation location for the wall bracket.
It must be possible to remove the handheld vacuum
cleaner easily and there must be an accessible mains
power socket for the mains adapter
4. Drill two holes about 34 mm apart. Use the wall bracket
to mark the holes to ensure the correct spacing, then drill
holes must be suitable for 6 mm wall plugs
5. Push the wall plugs into the holes and then screw the wall
bracket firmly into place using the screws
6. You can place the nozzles on the accessory’s holder to the
side
7. Connect the mains adapter to a mains power socket
Loading ...
Loading ...
Loading ...