Netgear RBS860-100EUS User Manual

Loading ...

In the Login field, enter the login information for the ISP connection.

This is usually the name that you use in your email address. For example, if your main

mail account is [email protected], you would type JerAB in this field. Some ISPs (like

Earthlink and Deutsche Telekom) require that you use your full email address when

you log in. If your ISP requires your full email address, type it in this field.

In the Password field, enter the password for the ISP connection.

In the Service Name field, enter a service name.

If your ISP did not provide a service name, leave this field blank.

Note: The default setting of the Connection Mode field is Always On to provide a

steady IPv6 connection. The router never terminates the connection. If the connection

is terminated, for example, when the modem is turned off, the router attempts to

reestablish the connection immediately after the PPPoE connection becomes available

again.

9. Select an IPv6 Domain Name Server (DNS) Address radio button:

•

Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers.

Your ISP automatically assigns this address.

•

Use These DNS Servers. If you know that your ISP requires specific servers, select

this option. Enter the IP address of your ISP’s primary DNS server. If a secondary

DNS server address is available, enter it also.

10. Select an IP Address Assignment radio button:

•

Use DHCP Server. This method passes more information to LAN devices, but

some IPv6 systems might not support the DHCv6 client function.

•

Auto Config. This is the default setting.

This setting specifies how the router assigns IPv6 addresses to the devices on your

home network (the LAN).

11. (Optional) Select the Enable RIPng check box.

This selection enables RIP Next Generation (RIPng) on IPv6 Internet connections.

RIPng is an extension of Routing Information Protocol (RIP) that supports IPv6.

12.

(Optional) Select the Use This Interface ID check box and specify the interface ID

that you want to be used for the IPv6 address of the router’s LAN interface.

If you do not specify an ID here, the router generates one automatically from its MAC

address.

13. Click the Apply button.

User Manual39Specify Your Internet Settings

Orbi Whole Home Tri-Band Mesh WiFi 6 System

Loading ...

Netgear RBS860-100EUS Orbi Tri-Band WiFi 6 Mesh Add-on Satellite (RBS860) - Works with Orbi RBR860S and RBK863S, Adds Coverage Up to 2,700 sq. ft, AX6000 (6Gbps)