Loading ...
Loading ...
Loading ...
6
INSERTING THE
WATER FILTER
Your coffeemaker comes with a charcoal water
filter that eliminates chlorine, bad tastes and
odors from tap water.
• Remove the filter from polybag and
soak it, fully immersed, in cold tap water
for 15 minutes.
• Lift the water filter holder out of the
water reservoir.
• Press down on the filter compartment
and pull toward you to open.
• Place filter into the holder and snap it closed.
Be careful – improper placement can tear the
filter skin.
• Flush filter by running cold tap water
through holes in bottom of compartment for
10 seconds.
• Allow the filter to drain completely.
• Slide the water filter holder back into the
channel in the water reservoir, pushing it
down to the base of the unit.
NOTE: We recommend changing the water filter
every 60 days or after 60 uses, and more often if
you have hard water. Replacement filters can be
purchased in stores, or by calling Cuisinart
Consumer Service, or at www.cuisinart.com.
GETTING TO KNOW
YOUR CONTROL PANEL
1. Power ON/OFF
Press to turn the brewer on and off.
2. Grind Button
Press to automatically start
or stop grinding coffee into the
HomeBarista
®
Reusable Filter Cup.
Turns off when grinding is complete.
3. Add Water Indicator
Indicator will illuminate Red when
water level is low. The indicator turns
off when the water reservoir is filled
past minimum level.
4. Brew Size Buttons
Select from 8 oz., 10 oz., or 12 oz.
cup size to begin brewing
.
Coffeemaker Charcoal
Water Filter and Holder
1
2
3
4
Loading ...
Loading ...
Loading ...