Loading ...
Loading ...
Loading ...
5
PREPARATION AND INSTALLATION
Preparation
Allow 24 hours before switching on the fridge. During this time we recommend that you leave the door open to
clear any residual odors.
The location you have selected for your fridge should:
Be unencumbered and well ventilated
Be well away from any heat source and direct sunlight
Not be too damp (laundry, pantry, bathroom etc.)
Have a flat floor
Have a standard and reliable electricity supply (standard socket to country standards, linked to the
ground), it is not recommended to use a multi-socket or extension lead
Have a surge protector fitted to the electrical outlet
Away from the microwave oven. Certain microwave ovens do not have wave interference shield.
When placed within 1 meter vicinity of the wine cabinet, they may affect the operation of the fridge.
Avoid locating the unit in moist areas, like a garage.
The unit should be placed where the ambient temperature is proper. If the temperature is above or below this
range, it will affect the performance of the unit. Placing in cold or hot temperature conditions may cause
cellar's temperatures fluctuating, and it will not reach the ideal one.
Installation
Read the instruction manual.
Unpack and remove all of the protection and adhesive strips from the packaging around and inside the fridge.
The fridge must be positioned such that the plug is accessible. Release the power cord. Move your fridge to
its final location. The fridge should be installed in a suitable place where the compressor will not be subject to
physical contact.
Leveling your fridge: Units must be leveled before loading your drinks. The unit is equipped with 4 adjustable
feet to facilitate easy leveling. It’s recommended that you tighten the back feet to the maximum and adjust the
front feet to level the unit.
Built-in Instructions
“built-in” fridges and beverage centers are front venting but are not designed to be fully integrated behind a
joinery door.
Please follow the installation diagram when installing a built-in unit. No less than the minimum installation
dimension or it will affect the venting of fridge.
built-in units draw air from right of ventilation frame and expel through left of ventilation frame under the front
door.
Loading ...
Loading ...
Loading ...