Loading ...
Loading ...
3
IMPORTANT SAFETY RULES
Before the appliance is used, it must be properly positioned and installed as described in this manual, so read the
manual carefully. To reduce the risk of fire, electrical shock or injury when using the appliance, follow basic precaution,
including the following:
Read all instructions before using the fridge.
Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do not use
an extension cord.
Replace all panels before operating.
It is recommended that a separate circuit, serving only your appliance be provided. Use an outlet that cannot
be turned off by a switch.
Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or explosion. And do
not store or use gasoline or other flammable vapours and liquids in the vicinity of this or any other appliance.
The fumes can create a fire hazard or explosion.
Before proceeding with cleaning and maintenance operations, make sure the power line of the unit is
disconnected.
Do not connect or disconnect the electric plug when your hands are wet.
Unplug the appliance or disconnect power before cleaning or servicing. Failure to do so can result in electrical
shock or death.
Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in this
material. All other servicing should be referred to a qualified technician.
To Prevent A Child From Being Entrapped, Keep Out Of Reach Of Children And Not In The Vicinity Of fridge.
Before you throw away your old fridge, take off the door but leave the shelves in place so that children may
not easily climb inside.
Never allow children to operate, play with, or crawl inside the appliance.
To ensure proper ventilation for your appliance, the front of the unit must be completely unobstructed. Choose
a well-ventilated area with temperatures above 60°F (16°C) and below 90°F (32°C). This unit must be
installed in an area protected from the element, such as wind, rain, water spray or drips.
The appliance should not be located next to ovens, grills or other sources of high heat.
The appliance must be installed with all electrical, water and drain connections in accordance with state and
local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in accordance with the
National Electrical Code and local codes and ordinances is required.
-- Do not kink or pinch the power supply cord of appliance.
It is important for the appliance to be levelled in order to work properly. You may need to make several
adjustments to level it.
Do not use solvent-based cleaning agents of abrasives on the interior. These cleaners may damage or
discolour the interior.
Do not use this appliance for other than its intended purpose.
Loading ...
Loading ...
Loading ...