Loading ...
Loading ...
Loading ...
TURNING HEATER ON:
For Flame Effect Only- Slide switch to
ON position, open the flame effect
without any heater functions. Slide
switch to OFF position, close the flame
effect.
For Low Heat-Slide main power ON/OFF
switch to ON position and Slide switch “I”
to ON position.
For High Heat-Slide main power ON/OFF
switch to ON position and slide both
switch “I” and switch “II” to ON position.
SETTING THERMOSTAT: After heater has been turned on and the
room has reached the desired temperature, slowly rotate the
thermostat knob counter-clockwise until the heater shuts off (you
should hear a faint “click”) By leaving the thermostat at the setting
it will automatically maintain this temperature. To lower the
temperature, rotate the knob further counter-clockwise towards
the LOW(-) position. To raise the temperature, rotate the
thermostat knob clockwise towards the HIGH(+) position.
Loading ...
Loading ...
Loading ...