Loading ...
Loading ...
Loading ...
— 16 —
u
Make sure the range hood is unplugged or turn OFF
breaker.
v
Placeaat-headscrewdriverbetweenlightcover
and housing to remove cover.
w
Gently pull defective bulb straight out and discard.
CAUTION: BULB MAY BE HOT, PLEASE TAKE OUT
THE BULB WHEN THE BULB IS COMPLETELY
COOL!
x
Wear a cotton glove or use a cloth to handle the
replacement bulb.
DO NOT handle with bare ngers as this may
shorten the life of the bulb).
Push gently but securely into light socket.
y
Replace light cover.
U
Turn ON breaker and range hood to test for
operation.
Replacing the Light Bulbs
IMPORTANT:
ALWAYS SWITCH OFF THE ELECTRICITY SUPPLY AT THE MAIN PANEL BEFORE CARRYING OUT ANY OPERATION
ON THE APPLIANCE.
This range hood uses halogen bulbs: 20 W 12 V type G4.
NOTE: DO NOT push too hard as bulb “legs” can break off.
Maintenance
Cleaning Filters
IMPORTANT: Drain oil from spacers, lters, oil tunnels, oil containers before oil and residue overow!
• Remove all spacers, lters, grease tray, and oil containers and discard oil and residue.
• Wash with warm soapy water. NOTE: Stainless steel lters, spacers and oil tunnel are top rack dishwasher safe.
• Dry thoroughly before replacing and follow directions for installation in reverse.
• Filters should be cleaned after every 30 hours of use.
• Should lters wear out due to age and prolonged use, replace with a new lter.
Loading ...
Loading ...
Loading ...