Ancona AN1132 User Manual

Loading ...

— 13 —

Installation

STEP 10

Mount Range Hood onto Wall

• Hang the range hood on the hooks of the hood

mounting bracket. (See Figure #3)

• Screw the range hood to the wall.

CAUTION - Make certain the range hood is

secure before releasing!

Fig #3

STEP 11

Connect Ductwork

• Attach ductwork to damper. Secure the ductwork with duct tape to make sure joints are secure and air- tight.

• Donotinstalltheducttapetootightlyasthismaypreventthedamperapsfromopeningwhichwilloverworkthemotor

and cause improper functioning of the unit.

• Fasten all connections with sheet metal screws and tape all joints with certied aluminum or foil tape. Use caulking to

seal exterior wall or roof opening around the cap.

STEP 12

Install Chimney

• Place chimney on top of the main housing.

• Remove the protective coating from the upper chimney. Carefully slide the upper chimney down into the lower chimney.

Make sure upper chimney is moving freely.

• Use two (2) screws to x lower chimney to range hood (Figure #4).

• Hook lower chimney bracket to lower chimney. (See Figure #5)

• Screw lower mounting bracket onto wall.

• Screw the upper chimney to the upper mounting bracket. (See Figure #6)

Fig #4

Fig #6Fig #5

Loading ...

Ancona AN1132 24 Inch Stainless Steel Ducted Chimney Style Wall Mount Hood