Loading ...
Loading ...
Loading ...
1
2
3
4
5
6
7
8
9
10
11
The Pressure Adjustment Knob controls the amount of force that will be used to push the
transferred image into the fibers of the garment. Clockwise increases pressure. Counter
clockwise decreases it.
1.Placement
2.Heating plate
3.Handle
4.Aviation connector
5.Button
6.Pressure Adjustment Knob
7.Overload protector
8.Power socket
9.Power switch
10.Control panel
11.Column
The Control Panel on the right upper face of the casing is where you will et heat and times
requirements of your project. These will vary depending on the vinyl or transfer paper
used .
The handle opens & closes the top & bottom Heated Platens of the revolve press.
The overload protector is a breaker. It will pop out when there is an overload of electricity.
Press it in to reset.
The Power switch must be set to the on position and the Cord must be plugged in before
pressing
Overview of Your Heat Press
Loading ...
Loading ...
Loading ...