![](https://files.manualsfile.com/60979043-e3/bg1.png)
03
此作业引起的商业破
损事故不属于产品保
修范围之内,请小心
操作
02
安装注意事项
03
使用注意事项
安装前请认真确认各个部件的数量
请注意,气压杆一旦安装上就比较难拆除。如果遇到搬
家等需要拆解椅子的情况。请用橡胶头的锤子多次轻轻
敲打气压杆的头部,再拆下底座。然后持续轻轻敲打五
星脚,利用振动的原理使气压杆脱落。由于需要使用工
具来完成,所以请小心不要受伤
1.
2.
在清扫打理时,请用柔软的布进行擦拭1. 为防止摔倒,在使用椅子的过程中请保
证椅子的受力均匀
7.
请不要踩在椅子上或把椅子当作梯子
来用,会有引起侧翻的危险
4.
禁止未成年人安装和调节产品功能需
要由成年人监护安装和使用
10.
关于产品功能的使用,请按产品展示的
说明进行操作
2.
为了避免损坏和安全起见,请不要快速拉
椅子或用力拉,不要坐在椅子的扶手上面
8.
请注意,本产品仅限一人使用,二人以上
使用会破坏产品的稳定性,具有一定危险
5.
最大载重 120KG11.
请避免在潮湿或有烟火的地方使用,请
避免长时间的阳光直射
3.
如果椅子有部件脱落丢失或损坏,请立
即停止使用
9.
为了您的安全,严禁拆解气压杆6. 禁止非专业人员拆卸椅子的部件和维修12.
maintenance manual
1. Because the product is packaged in a closed environment, it is normal to have a slight
smell when it is first assembled and used.
2. You can eliminate the odor by putting some lemons, orange peels, tea leaves, etc.,
ventilate for 1-2 days, and use professional leather bag fragrances, which can also help
to remove the odor as soon as possible.
3. When using the chair, it is necessary to minimize the use in extreme environments
such as exposure and humidity. In order to prolong the service life of the chair, it is
recommended to use it in a dry, room temperature room.
Tips for
first-time
use
The maintenance
method of
the mesh cloth
surface
1. If there is dust on the mesh cloth, you can blow it with a hair dryer for 1-2 minutes
2. If the mesh cloth is dirty, it is recommended to use a wet towel, drop a drop of
detergent, and lighten the dirty place Gently wipe for 1 minute.
Leather fabric
maintenance
precautions
1. When cleaning the chair, you can use a soft damp cloth to gently wipe it, and then
use a soft dry cloth to dry the clean part. If the dirt is stubborn, you can use a
neutral detergent such as leather cleaner to clean it
2. Do not use bleach, corrosive liquids, disinfectants, organic solvents (such as
gasoline, alcohol, paint and detergents, etc.) to wipe
3. When using this product in clothes that are easy to fade, it is recommended to
add an external seat cushion to avoid staining the product.
Periodic Maintenance
and Disassembly
Instructions
1. Place the computer chair on a flat ground, and keep the ground clean,
especially to remove the cords and hair on the ground in time to prevent the
wheel from running poorly
2. In order to have a better user experience, it is recommended that you re-tighten
the chassis screws, armrest screws and backrest connecting screws of the
chair when the chair is used for 6 months to avoid the problem of abnormal
noise and shaking due to loose screws.
3. When abnormal noise occurs in the chassis, it is recommended that you use
lubricating oil on both sides of the bearing, such as butter (calcium-based
grease), bearing oil.
Loading ...
Loading ...
Loading ...