Loading ...
Loading ...
Loading ...
18
18. TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
Espresso coee is not delivered any
more
No water in the tank (A17) Fill the tank
The
light is on and the
light is ashing to indicate that the cof-
fee or steam circuit is empty.
Press the button corresponding to the
light
.
The lter is blocked, or the perforated
lter is missing
Clean as described in section "11.4 Cleaning
the coee lters" and check that the perfo-
rated lter is correctly inserted
The tank has been inserted incorrectly
and the valves on the bottom are not
open
Press the tank down lightly to open the
valves on the bottom
Scale in the water circuit Descale as described in section "12.
Descaling"
The espresso coee drips from the
edges of the lter holder rather than
the holes
The lter holder has been inserted in-
correctly or is dirty
Attach the lter holder correctly and rotate
rmly as far as it will go
The espresso boiler gasket has lost elas-
ticity or is dirty
Have the espresso boiler gasket replaced by
Customer Services
The lter is blocked, or the perforated
lter is missing
Clean as described in section "11.4 Cleaning
the coee lters"
The lter holder cannot be attached to
the appliance
The ground coee has not been pressed
or is too much
Clean as described in section "6.6 Grind the
coee directly into the lter"
The coee froth is too light (delivered
from the spout too fast)
The appliance settings need reviewing See section "14. How to make perfect coee"
The coee froth is too dark (delivered
from the spout too slowly)
The appliance settings need reviewing See section "14. How to make perfect coee"
No milk froth is formed when making
cappuccino
The ring (A7) is in the "FLAT" (NO
FROTH) position
Push the ring into the "FOAM" position
Milk not cold enough Always use milk at refrigerator temperature
The cappuccino maker (A8) is dirty Clean the cappuccino maker as described in
section "8. Cleaning the cappuccino maker
after use"
Scale in the water circuit Descale as described in section "12.
Descaling"
At the end of descaling, the appliance
requests a further rinse
During the rinse cycle, the water tank
has not been lled to the MAX level
Repeat the rinse cycle from point (8) of section
"12. Descaling"
The coee mill doesn't work Inside the coee mill there is a
non-millable foreign body
Clean the mill as indicated in par."11.2 Clean-
ing the drip tray", making sure you have re-
moved all the grains from the bean container
(A2) before removing it.
Before reinserting the burr, carefully vacuum
any residue from its seat (g. 44).
Loading ...