Bliss Hammocks BH-993CA User Manual

Loading ...

Fig. 5

Fig. 6

ADJUSTING THE HEIGHT OF THE ROPE:

1. If you want to adjust the height of the tree glider rope (Fig. 4):

• Shortening the height: Push bottom of the rope through the

S-ring, then pull the top rope

• Lengthening the height: Push bottom of the top rope through

the S-ring, then pull the bottom rope.

HANGING KIT INSTRUCTIONS:

1. Find a support structure such as the ones mentioned in the "Before

Assembly" section on the rst page. Make sure the support

structure is at least 60 inches (1.5 m) above the ground (Fig. 5)

2. Wrap each strap around the support structure. Distance each strap

40 inches (1 m) apart from each other. Attach each tree glider rope

loop to each heavy-duty carabiner clip and close the clips to secure

them (Fig. 6).

Adjusting height: Remove the tree glider rope loops from the

heavy-duty carabin

er clips. Wrap the straps around the support

structure until the tree glider is at least 2 feet (61 cm) above the

ground.

If you have any questions or comments,

please call the Bliss Hammocks

customer service department at:

1-800-695-2626

Original instructions.

Made in China | Snow Joe, LLC 305 Veterans Blvd, Carlstadt, NJ 07072 | snowjoe.com | BH-993CA

SAVE THESE INSTRUCTIONS

Fig. 4

S-ring

Bliss Hammocks BH-993CA Bliss Outdoors Rectangular Tree Glider wHanging Rope Kit Collapsible Steel Frame 400 Lb. Capacity