Loading ...
Loading ...
Loading ...
22
EVU Technical Manual
Optional Omnimount Bracket
The Optional Omnimount Bracket, available from Omnimount, is used to facilitate mounting. The back panel of any of the
EVU loudspeaker systems includes four (4) heavy-duty T-nut mounting points for an Omnimount style bracket. Four (4) M8
pan head Phillips screws are included in the EVU series hardware kit for mounting to an Omnimount bracket.
Compatible Omnimount Models
The following Omnimount models are available in 30 Series or 60 Series:
WA Series, WB Series, WBX Series, CA-MP Series, ST-MP Series, STX-MP Series.
See the Omnimount website as more models may become available.
When selecting your Omnimount bracket, ensure the Omnimount bracket’s bolt pattern meets the pattern shown in Figure 32
for 30 series loudspeaker mounting or the pattern shown in Figure 33 for 60 Series single cabinet loudspeaker mounting.
To install the optional Omnimount bracket to the enclosure, do the following:
NOTE: This procedure is not illustrated.
Tools : #2 Phillips screwdriver.
1. Remove four (4) M8 flat head screws from the back of the loudspeaker enclosure.
2. Position the optional Omnimount bracket over the bolt holes on the back of the enclosure.
3. Apply thread locker (not included) to the four (4) M8 Pan head screws.
4. Securely fasten the four (4) M8 pan head screws to the back of the enclosure and bracket.
REFERENCE:For more information, see the manufacturers’s technical documentation to complete the installation.
5. Set the desired angle.
FIGURE 32. Bolt Pattern for 30 Series Single Cabinet
FIGURE 33. Bolt Pattern for 60 Series Double Cabinet
Loading ...
Loading ...
Loading ...