Loading ...
Loading ...
2 3
Safety and Usage Precautions
Warning
Caution
Product handling
Do not drop, bump or apply excessive force to the unit.
Be careful not to allow foreign objects or liquids to enter
the unit.
Battery handling
Install the batteries with the correct +/− orientation.
Use a specied battery type.
Do not mix new and old batteries or different brands or
types at the same time.
When not using the unit for an extended period of time,
remove the batteries.
If a battery leak should occur, wipe the battery
compartment and the battery terminals carefully to
remove all residue.
Operating environment
Do not use in extremely high or low temperatures.
Do not use near heaters, stoves and other heat sources.
Do not use in very high humidity or where it could be splashed
by water.
Do not use in places with frequent vibrations.
Do not use in places with much dust or sand.
Connection cables and input/output jacks
Always turn the power OFF for all equipment before
connecting any cables.
Always disconnect all connection cables and the AC
adapter before moving the unit.
Volume
Do not use at a loud volume for a long time.
Usage Precautions
Interference with other electrical equipment
For safety considerations,
is designed to minimize
the emission of electromagnetic waves and suppress
interference from external electromagnetic waves.
However, interference could still occur if
is placed
next to equipment that is very susceptible to interference
or that emits powerful electromagnetic waves.
If this occurs, place the
and the other device farther
apart.
With any type of digital control device-including the
-electromgnetic interference can cause malfunction,
corrupt or destroy data, or cause other unexpected
issues. Always exercise caution.
Cleaning
Use a soft cloth to clean the exterior of the unit if it
becomes dirty.
If necessary, use a damp cloth that has been wrung out
well to wipe it.
Never use abrasive cleansers, wax or solvents such as
alcohol, benzene or paint thinner.
Temperature considerations
The
may become warm after long periods of
continuous use. This is normal, as long as the unit does
not become too hot to touch.
Breakdown and malfunction
If the
malfunctions or operates abnormally,
disconnect it immediately. Contact the store where you
purchased the unit, or contact ZOOM customer service
with the following information: product model, serial
number, and the specic symptoms of the breakdown
or malfunction—along with your name, address, and
telephone number.
Copyrights
• Windows
®
is a registered trademark of Microsoft
®
Corporation.
• Mac
®
, iPad
®
and Lightning™ are trademarks or registered
trademarks of Apple Inc.
• MIDI is a registered trademark of Association of Musical
Electronics Industry (AMEI).
• iOS is a trademark or registered trademark of Cisco
Systems, Inc. (USA).
• Other product names, registered trademarks and company
names in this document are the property of their
respective companies.
Note: All trademarks and registered trademarks in this
document are for identification purposes only and
are not intended to infringe on the copyrights of their
respective owners.
Recording for any purpose other than personal use from
copyrighted sources, including CDs, records, tapes, live
performances, video works and broadcasts, without
permission of the copyright holder is prohibited by law.
ZOOM Corporation will not assume any responsibility
related to infringements of copyrights.
Safety and Usage Precautions (continued)
Declaration of Conformity
For EU Countries
FCC regulation warning (for U.S.A.)
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
•
Connect the equipment to an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
Loading ...
Loading ...
Loading ...