128470781 Gerni Classic 130.3 Series 1885 PSI Pressure Cleaner

User Manual - Page 13

For 128470781.

PDF File Manual, 24 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
13Original Instructions
IMPORTANT!
The bearing capacity of the wall hook is max. 30 kg.
4.7 Pairing the machine (Models with wireless regulation)
B18 Before using the machine with wireless regulation, the spray handle must be electrically
paired to the machine. When the battery has been mounted - ref. section 3.4, and the
spray handle is in pairing mode (orange LED is fl ashing (1) then turn on (2) the machine.
The orange LED is now turned off and the spray handle is operational.
4.8 Using wireless regulation (Models with wireless regulation)
B19 The water pressure and use of energy is regulated by clicking the arrows (1) on the spray
handle. The power can be regulated stepwise by pushing and releasing each button. It
can also be regulated continuously by pushing and holding down each button. If so, the
power will be increased/ decreased until max/ min is reached. The green LED illustrating
the power level (2) is only lighting when pressing the up/down keys (1).
Other wireless units (eg. microwave ovens, baby monitors, neighbours' wireless
devices) that operate in the 2.4 GHz band can have a reduced effect on the wireless
range between spray handle and machine.
5 Fields of application and working methods
5.1 General
Effi cient high presure cleaning is achieved by following a few guidelines, combined with your
own personal experience of specifi c cleaning tasks. Accessories and detergents, when correct-
ly chosen, can increase the effi ciency of your pressure washer. Here is some basic information
about cleaning.
5.1.1 Detergent and foam
Foam or detergent should be applied onto dry surfaces so that the chemical product is in direct
contact with the dirt. Detergents are applied from bottom to top, for example on a car body-
work, in order to avoid "super clean" areas, where the detergent collects in higher concentrati-
on and streams downwards. Let the detergent work for several minutes before rinsing but never
let it dry on the surface being cleaned. Note: It is important that the detergents do not dry up.
Otherwise the surface that has to be cleaned can be da maged.
5.1.2 Mechanical effect
In order to break down tough layers of dirt, additional mechanical effect may be required. Spe-
cial wash brushes offer this supplementary effect that cuts through dirt (especially by car wash-
ing).
Loading ...
Loading ...
Loading ...