Loading ...
Loading ...
Loading ...
Operating YourWasher
Selecting a load size
Positionthe Load Size Selector at the setting
that corresponds to the size load you want to
wash. Select a load size based on the size of
load and the fabric you are washing. See
page 14 for additional loading information.
To change the load size setting after the
washer has started to fill, move the Selector
to the desired new setting.
NOTE: Your washer fills to the proper water
.J level (not to the top of the agitator) for
the load size selected.
• Items should move freely in the washer. Do
not overload the machine or select a load
size that is too small for the wash load.
• Use a large load size setting for best
results with permanent press clothes.
• Reduce wash time when using a small load
size setting. Loads with only a few small
items need less wash time.
Settings may vary with model
Ifyour selector has RESET
To change the water level selection after
the washer starts filling, first move the
Selector to RESET, then to the new water
level.
Selecting wash-rinse temperatures
Match the water temperature to the type of
fabric and soils being washed. The top
temperature is the wash water and the
bottom temperature is the rinse water.
See the "Water usage guide" on page 18
for more information.
Settings may vary with model
Selecting a cycle and seffing
You willfind information you need to help
you make correct cycle selections in this
section.
• Pages 7-9: Use the information on these
pages to guide you when selecting a wash
cycle and time.
• Page 10: Use this page to help you under-
stand what happens during a wash cycle.
6
Cyclee may vary with model
Loading ...
Loading ...
Loading ...