Loading ...
Loading ...
Loading ...
Operating YourWasher
This section tells you how to operate your washer. Operating your washer properly
enables you to obtain the best possible results.
IN THIS SECTION
Bofore starting your washer ............ 5
Starting or stopping your washer ...5
Selecting a load size ......................... 6
Selecting wash-rinse
temperatures ..................................... 6
Selecting a cycle and setting ........... 6
Using rinse and spin ........................ 9
Using drain and spin ........................ 9
What happens in each cycle .......... 10
Before starting your washer
Add measured detergent. Then place a
sorted load in the washer before starting.
See page 13 for additional =Before you
wash" information.
NOTE: If your washer has a Consumer Buy
Guide, remove it and place it in your Use
and Care Guide.
Starting or stopping your washer
Starting your washer
1. Select a load size and water temperature.
2. Push in and turn the Cycle Control Knob
clockwise. Stop when the indicator on the
knob's outer ring points to the setting in
the wash cycle you want. The settings
indicate soil level.
3. Pull out the Cycle Control Knob.
Stopping and restarting your
washer
=To stop the washer at any time, push in
the Cycle Control Knob.
• To restart the washer, close the lid(if
necessary) and pull out the Cycle Control
Knob.
Cycle= may vary with model
5
Loading ...
Loading ...
Loading ...