Loading ...
Loading ...
Loading ...
Delay Start
The DELAY START option allows you to
automatically delay starting your dishwasher from
1-24 hours.
To activate press the DELAY START pad until the
desired delay time shows in the STATUS window
and press START.
To cancel the DELAYSTART option and begin the
cycle before the delay period is over, press the
Cancel and then the Start pad.
Child Lock Controls
To prevent children from acddently changing the
dishwasher cycle or starting the dishwasher, lock
the dishwasher controls by pressing the AIR DRY
pad for 3 seconds. An indicator light on the lock
graphic pad will illuminate when the controls are
locked. To unlock the controls, press the AIR DRY
pad until the indicator light goes out.
To Cancel a Cycle
To cancel a cycle at anytime, open the door and
press the CANCEL pad until the 1 min drain feature
is initiated. Close the door and the drain cycle
will begin. You will hear a tone for the start and
completion of the drain cycle. When the door is
opened, the last cycle selected will be displayed.
If desired, a new cycle can now be selected by
pressinq START pad and upon closing the door the
cycle will begin.
In the unlikely event the dishwasher
malfunctions, the indicator may display
one of the following codes: "i10" - refer to
dishwasher won't run or fill and try to solve
the problem "i20" - refer to dishwasher
does not drain properly and try to solve the
problem. If, after the check, the problem
remains, or if the status window shows
other error codes, contact the Frigidaire
Customer Care Center at 1=800-944 .
9044. They will be able to provide
assistance in troubleshooting the problem
and/or locating an authorized service
technician, if needed.
Status Indicator Lights
The WASHING Light comes on at the beginning of
cycle and remains on until end of cycle.
The CLEAN light will come on at the end of the
cycle and remains on until the door is opened.
When the SANITIZE option is selected, and the
criteria is met, the SANITIZED light will glow
and remain on until the door is opened. If the
dishwasher did not properly sanitize the dishes,
the light will not come on. This can happen
if the cycle is interrupted or if incoming water
temperature is below 120°F.
Status Window
1-24 .................
CL ....................
MINUTES ..........
LO-L6.................
Number of delay start
hours. The last hour
will count down in
minutes.
Close dishwasher
door. The status
indicator lights will
also flash to indicate
current cycle status.
Number of minutes
left in cycle (1-99).
If cycle is longer than
99 minutes, a small
light will appear in
and remain on until
time counts below 99.
Level of Rinse Aid
dosage.
Loading ...
Loading ...
Loading ...