Loading ...
Loading ...
Loading ...
Yourdishwashercleansbysprayinga mixture of hot water and detergent through the sprayarms
against soiled surfaces. First, the dishwasher drains for a few seconds to remove soils dropped while
loading, then fills with water covering the filter area. Water is then pumped through the spray arms. Soil
particles go through and across the filter and down the drain as the water is pumped out. This series of
steps are repeated as needed. The number of water fills varies with the cycle being used.
Features may vary according to model
Upper Spray Arm
Tub Gasket
Cup Shelves
Rack
Middle
Arm
Silverware
Basket
Bottom Rack
Lower
Arm Filter
Detergent Serial
Dispenser i Label
(located on
Rinse Aid right side of
Dispenser door)
Operating Instructions
Getting Started
1. Load Dishwasher (See Preparing and Loading Dishes).
2. Add detergent (See Dishwasher Dispenser & Detergents).
3. Add Rinse Aid, if needed (See Rinse Aid).
4. Close door to latch.
5. Select desired CYCLE (See Cycle Chart). The indicator fight above the pad wilt glow when
selected.
6. Select desired OPTION (See Energy Options). The indicator light above the pad wilt glow
when selected.
7. Run hot water faucet nearest dishwasher until water is hot. Turn water off.
8. To start, press START pad.
iiiii
Loading ...
Loading ...
Loading ...