Loading ...
19. Place the bottom hinge LH (kit contents) onto the
cabinet, placing it down then towards cabinet to
install. Replace the screw.
1
2
20. Replace the hinge foot onto the LH bottom hinge and
tighten with screw.
21. Replace the food door by holding at 45º and gently
slide onto the bottom hinge and closing the door.
45º
22. Replace LH centre hinge (Kit Content) by lifting the
door slightly and sliding hinge into the door and
placing the door down again.
1
2
23. Insert 2x8mm screws from existing center hinge into
the LH center hinge, tighten the screws until the bracket
is secured. Assemble the 2 Phillips head screws and
covers on other side as shown.
screws
screws
& covers
24. Replace the freezer door by holding at 45º and gently
slide onto the centre hinge and closing the door.
45º
25. Slide the LH top hinge (kit contents) into the door,
loosely screw the 3 x 8mm screws from the existing top
hinge in the cabinet.
Follow Step number 12 to 16 for model WTB2300 and
WTB2500 where fitted with Kick Plate). For other models
without Kick Plate please skip to Step number 17 and
onwards.
12.
Unscrew the four screws indicated below to remove the
side kickplates.
13. Unscrew the bottom hinge screw shown, pull the hinge
away from cabinet then up to remove.
1
2
14. Place the bottom hinge LH (Kit content) onto the
cabinet, placing it down then towards cabinet to
install. Replace the screw.
1
2
15. Remove the spacer from the kickplate and clip to the
other side.
16. Assemble the kickplate to the refrigerator using the
four screws.
Skip Steps 17 to 20 and follow from Step 21 & onwards.
17. Unscrew the hinge foot using phillips head screwdriver
and unscrew foot on opposite side. Do not discard.
18. Unscrew the bottom hinge screw shown, pull the hinge
away from cabinet then up to remove.
1
2
26. Ensure that the edges of the doors are parallel with the
sides of the cabinet.
27. Ensure that the food door and the freezer door have a
parallel gap.
28. Fully tighten the LH top hinge to the cabinet until the
hinge is secure.
29. Clip the LH hinge cover (kit contents) over LH
top hinge.
30. Insert the RH top hinge hole cap (kit contents) in the
cabinet as shown.
31. Stand the refrigerator upright.
WARNING
Your refrigerator is heavy–you may need assistance.
33. Level the cabinet by adjusting the foot.
For further information on all Westinghouse appliances, or to obtain detailed dimension and installation information,
call into your Retailer, phone or email our Customer Care team or visit our website:
Westinghouse. We are part of the Electrolux family.
Share more of our thinking at www.electrolux.com
© 2013 Electrolux Home Products Pty Ltd ABN 51 004 762 341
WMAN_DOORREV_June13
Part number: 807557701
AUSTRALIA
phone: 1300 363 640
fax: 1800 350 067
email: [email protected]
web: www.westinghouse.com.au
NEW ZEALAND
phone: 09 573 2384
fax: 0800 363 600
email: [email protected]
web: www.westinghouse.co.nz
** Recommended to apply a small amount of silicone grease
(Molykote EM-50L or equivalent -- not provided with kit) on
all pivoting pin of left hand hinges for lubrication **