User Manual Westinghouse WTB2300PC 230L Fridge

Documents for Westinghouse WTB2300PC

The following documents are available:
User Manual Photos
WTB2300PC photo
1. Ensure refrigerator is empty of all loose items and
unplugged from power source.
2. Store power cord next to motor to prevent damage.
Check for water in drain pan and remove any water
with a cloth or sponge if necessary.
drain pan
motor
Rear view of
refrigerator
3. Lay the refrigerator on its back.
WARNING
Your refrigerator is heavy–you may need assistance.
4. Remove the hinge cover with a soft plastic lever.
5. Remove the LH cap with a soft plastic lever.
6. Unscrew 3 x 8mm top hinge screws and remove RH top
hinge. Do not discard screws.
DESCRIPTION QTY
Cover top cabinet wh GR
Cover top cabinet wh WHT
1
1
Hinge top cover left GR
Hinge top cover left WHT
1
1
Hinge top left 1
Hinge centre left 1
Hinge bottom base left 1
Door auto closer LH 2
NOTE: Keep kit parts separate from other parts as you
disassemble them to avoid mix-ups.
TOOLS YOU WILL NEED (not supplied)
Phillips head screwdriver
8mm (
5
/
16
"
) hex head socket
WARNING
Westinghouse takes no responsibility for incorrectly assembled
doors leading to injury or malfunction.
CAUTION
Refrigerator must stand for 30 minutes prior to connecting to
power supply to ensure system functions correctly.
IMPORTANT
All hinge screws require tightening to a torque setting
of 5-10Nm.
1 Cover top cabinet WH
2 Hinge top right and hinge top
cover right
3 Cover screw mullion WH
and screws
4 Hinge centre right
and screws
5 Adjustable foot
6 Hinge bottom assy right
FRIDGE DESCRIPTION
KIT CONTENTS
Top view of right hand hinge cabinet
Bottom view of right hand hinge cabinet
INSTRUCTIONS
7. Remove freezer door by opening 45º and gently slide
off hinge. Set door aside to prevent damage.
45º
8. Unscrew 2 centre hinge screws. Remove the Covers
and 2 Phillips screws underneath the covers. Do not
discard screws and covers.
screws
and covers
screws
9. Remove RH centre hinge by lifting the door slightly and
sliding hinge out of the door.
1
2
10. Remove food door by opening 45º and gently slide
off hinge. Set door aside to prevent damage.
45º
11. Remove the Pocket Handle Cover and Cover door
from the Fzr door and assemble them on the other
side. Remove the RH Door auto closer and replace
with LH Door auto closer (kit Content) on the other
side. Repeat the same steps with Food door.
door auto
closer LH
door auto
closer RH
cover door
pocket
handle
cover
INSTALLATION MANUAL
REFRIGERATOR DOOR REVERSAL KIT
Models: WTB2300WC, WTB2300PC, WTB2500WC, WTB2500PC, WTB2800WC,
WTB2800PC, WTB3400WC, WTB3400PC, WTB3700WC, WTB3700PC
5
6
1
3
2
4
Loading ...