Loading ...
Loading ...
Loading ...
65
CLEARANCES AND DIMENSIONS NOTICE
For safety considerations, do not install drawer in any combustible cabinetry, which is
not in accordance with the stated clearances.
UNPACKING YOUR MICROWAVE DRAWER
Remove all packing materials from inside the microwave drawer. DO NOT REMOVE
THE WAVEGUIDE COVER, located on the top of the microwave drawer. Remove the
feature sticker, if there is one. Check the drawer for any damage, such as misaligned
or bent drawer, damaged drawer seals and sealing surfaces, broken or loose drawer
guides, and dents inside the cavity or on the front side of the drawer. If there is any
damage, do not operate the microwave drawer and contact your dealer or ZLINE.
IMPORTANT NOTES TO THE INSTALLER
Read the entire installation portion of the manual before installing the microwave
drawer. Remove all packing materials before connecting the electrical supply. Observe
all governing codes and ordinances. Be sure to leave these instructions with the
consumer.
IMPORTANT NOTES TO THE CONSUMER
Keep this manual for the future reference. With use of any heat generating microwave
oven, there are certain safety precautions you should follow. These are listed in the
operation portion of the manual. Read all and follow carefully. Be sure your microwave
drawer is installed and grounded properly by a qualified installer or service technician.
IMPORTANT SAFETY INSTRUCTIONS
Fire or electrical shock resulting in property damage, personal injury or death may
occur if the information in this manual is not followed exactly. To reduce the risk of
tipping, the microwave drawer must be secured with a properly installed Anti-Tip block.
This microwave drawer must be electrically grounded in accordance with local codes.
Make sure any wall coverings and/or cabinets around the microwave drawer can
withstand the heat generated by the microwave drawer. Never leave the drawer open
when the microwave is unattended. Stepping, leaning, or sitting on the drawer may
result in serious injuries and may also cause damage to the microwave.
WARNING
INSTALLATION
CLEARANCES AND DIMENSIONS
Dimensions shown in the figure below must be used. Given dimensions provide
minimum clearance. Locate electrical outlet in the shaded area in the upper left-hand
corner of the cutout. Contact surface must be solid and level. The floor of the opening
should be constructed of plywood strong enough to support the weight of the oven.
INSTALLATION
Clearances & Dimensions
Installation Notices
Loading ...
Loading ...
Loading ...