Loading ...
Loading ...
Loading ...
Grounding type
wall receptacle
Do not, under any
circumstance, cut, II
remove, or bypass _
the grounding prong.
Grounding Instructions
Avoid fire hazard or electrical shock. Do not use an adapter
plug, an extension cord, or remove grounding prong from electrical power cord.
Failure to follow this warning can cause serious injury, fire or death.
This appliance is equipped with a 3-prong grounding plug for
your protection against shock hazard and should be plugged directly into a
properly grounded receptacle. DO NOT cut or remove the grounding prong from
this plug.
For personal safety, the range must be properly grounded. For maximum
Powersupplycord safety, the power cord must be plugged into an electrical outlet that is correctly
with 3-prong polarized and properly grounded. Ifa 2-prong wall receptacle isthe only
groundingplug available outlet, it is the personal responsibility of the consumer to have it
replaced with a properly grounded 3-prong wall receptacle installed by a
qualified electrician.
Personal injury or death from electrical shock may occur ifthe range is not installed bya qualified installer
or electrician.
See the INSTALLATION INSTRUCTIONS packaged with this range for complete installation and grounding instructions.
Important Safety Notice
The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a list ofsubstances known
to the state to cause cancer, birth defects or other reproductive harm, and requires businesses to warn customers of potential exposure
to such substances.
Conversion to Liquefied Petroleum Gas (or L.P. Gas)
Any additions, changes or conversions required in order for this appliance to satisfactorily meet the
application needs must be made by a qualified technician.
This Natural Gas appliance isdesigned to allow for conversion to Liquefied Petroleum (LP.) Gas.
If LP. conversion is needed, contact your local appliance dealer for assistance. The LP. Conversion Kit may be obtained
from your appliance dealer and should be installed by a qualified service technician. Before installing the kit be sure to
follow the LP. Installation Instructions carefully.
5
Loading ...
Loading ...
Loading ...