Vinotemp EL142SDST 24 Inch 155-BOTTLE DUAL-ZONE WINE COOLER

OWNER’S MANUAL - Transcript

• Page 1 - English - : OWNERS MANUAL A PROUD HERITAGE OF EXPERIENCE amp QUALITY EL142SDST 155BOTTLE DUALZONE WINE COOLER 732 South Racetrack Road Henderson NV 89015 18007778466 infovinotempcom wwwvinotempcom c F
• Page 2 - English - : YOUR WINE COOLER This unit can be used for storage andor service The unit has a glass door and soft interior light that you can use to display your wine SERVING WINES Storing wines at the proper temperature is important To preserve them as long as possible wine should be stored at approximately 55 Fahrenheit However the chart below suggests the optimal drinking temperature for the different styles of wine SERVING BEVERAGES Storing beverages at the proper temperature is important To preserve them as long as possible beverages should be stored at approximately 39 Fahrenheit However the chart below suggests the optimal drinking temperature for the different styles of beverages C F Wine Style C F Beverage Style Armagnac Brandy Cognac Water Full Bodied Red Wines Shiraz Black Ale Tawny Port Juice Medium Bodied Red Wines Sour Beers Amontillado Sherry Pale Ale Light Bodied Red Wines Dark Lagers Full Bodied White Wines Iced Coffee Medium Bodied White Wines Premium Lagers Rosé Light Bodied White Wines Wheat Beers Vintage Sparkling Light Pale Lagers Fino Sherry CocaCola Non Vintage Sparkling Dairy
• Page 3 - English - : GENERAL OPERATING INSTRUCTIONS Remove all external and internal packaging from your appliance Be sure that all parts have been included before discarding any packaging materials You may want to keep the box and packing materials for use at a later date Upon receipt and inspection of unit the supply cord must be replaced if it is damaged Contact our customer service at 18007778466 or infovinotempcom Let the unit rest UNPLUGGED for 24 hours once you have it placed in your home READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE Save these instructions To register your product visit httpwwwvinotempcom Register your warranty within 10 days of receiving the unit Please be sure to retain your proof of purchase Protect Your Investment with an Extended Warranty Add a New Leaf extended warranty to your order and have the security of knowing that if there should be a problem even years in the future New Leaf will be there to assist Usable for any Wine Cellar or other electronic device manufactured by Vinotemp Add this warranty to purchases made from vinotempcom or other qualified venders Warranty must be registered within the first 10 days from original purchase Visit wwwvinotempcom to purchase
• Page 4 - English - : TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS 5 ELECTRICAL CONNECTION 6 PARTS AND SPECIFICATIONS 7 INSTALLATION 8 OPERATING YOUR WINE COOLER 9 STORING WINE AND SHELVES 10 CARE AND MAINTENANCE 11 TROUBLESHOOTING 12 TERMS OF SALE AND WARRANTY 13 SERVICE amp IMPORTANT NOTICE 20
• Page 5 - English - : IMPORTANT SAFETY INSTRUCTIONS Do not operate this or any other appliance with a damaged cord Do not operate if housing is removed or damaged Exercise caution and use reasonable supervision when appliance is used near children Never allow children to operate play with or crawl inside the appliance Keep packing materials away from children Before performing any maintenance or cleaning ensure that the unit is unplugged or that the power line is disconnected Do not clean appliance with flammable fluids Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance The fumes can create a fire hazard or explosion Exercise caution when moving and installing the unit The cooler is heavy and may require two or more people when moving the unit to prevent strain or injury To ensure proper ventilation for your appliance the front of the unit must be completely unobstructed Choose a wellventilated area with temperatures above 60 F and below 90 F Locate the unit away from direct sunlight and sources of heat stove heater radiator etc This unit is intended for indoor use only and must be installed in an area protected from the elements Place the appliance on a solid level surface Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in this manual All other servicing should be referred to a qualified technician Connect to properly polarized outlets only It is recommended that a separate circuit serving only your appliance be provided Use receptacles that cannot be turned off by a switch or pull chain Be sure that the plug is fully inserted into the receptacle To protect against electric shock do not immerse appliance plug or cord in water or other liquids Avoid locating the unit in moist areas This appliance is designed to be builtin fullyrecessed or freestanding Do not use this appliance for other than its intended purpose For indoor household use only Do not operate the unit with wet hands while standing on a wet surface or while standing in water Do not use solventbased cleaning agents or abrasives on the interior of the cooler These cleaners may damage or discolor the interior Keep fingers out of pinch point areas and be careful when closing doors if children are around This appliance is designed for storing and cooling wines Do not store perishable food or medical products within the unit When disposing of refrigerated appliances special handling is often required It is the consumers responsibility to comply with federal and local regulations when disposing of this product Do not slide your wine cooler into place WARNING Risk of child entrapment and suffocation Before you throw away this or an old unit take off the door Leave the shelves in place so that children may not easily climb inside DANGER RISK OF FIRE OR EXPLOSION FLAMMABLE REFRIGERANT USED TO BE REPAIRED ONLY BY TRAINED SERVICE PERSONNEL DO NOT PUNCTURE REFRIGERANT TUBING
• Page 6 - English - : ELECTRICAL CONNECTION For your protection this unit is equipped with a 3conductor cord set that has a molded 3prong groundingtype plug and should be used in combination with a properly connected groundingtype outlet Do not under any circumstances cut or remove the third ground prong from the power cord supplied For personal safety this appliance must be properly grounded The cord should be secured behind the unit and not left exposed or dangling to prevent accidental injury A standard electrical supply 115V AC only 60Hz 15A properly grounded in accordance with the National Electrical Code and local codes and ordinances is required Never unplug the unit by pulling the power cord To disconnect the appliance always grip the plug firmly and pull straight out from the wall outlet When moving the unit be careful not to damage the power cord The unit should always be plugged into its own individual electrical outlet with a voltage rating that matches the rating label on the unit Extension Cord CAUTION It is strongly recommended that you do not use an adapter or an extension cord with this unit
• Page 7 - English - : PARTS AND SPECIFICATIONS Note This wine cooler is designed to store up approximately 155 standard Bordeaux 750 ml 118 inches lengthheight bottles Storing large andor oddly shaped bottles including champagne and sparkling wine bottles will decrease the capacity of your wine cooler Model EL142SDST Rated Voltage AC 115V Rated Frequency 60Hz Rated Power 160W Volume 428L Ambient Temp Range 60 90F 156 322C Control Temp Range 40 72F 44 222C Refrigerant R600a219 Oz Power Consumption 135 kWh24h Net Weight 287 lbs Gross Weight 308 lbs Dimensions W x D x H 235 x 2675 x 69 in Box Dimensions W x D x h 26 x 30 x 766 in
• Page 8 - English - : INSTALLATION Remove all packing material before using your wine cooler IMPORTANT Before connecting the unit to a power source let it stand upright for approximately 24 hours This will reduce the possibility of a malfunction in the cooling system from handling during transportation Clean the interior surface with lukewarm water and a soft cloth This unit is designed for freestanding and built in installation and indoor use only Position the unit in a dry and wellventilated place Avoid placing the wine cooler near any source of heat or moisture or in direct sunlight Do NOT install the unit in a location with an ambient temperature that will fall below 60F For builtin installation leave a 14 635mm space on each side and at the top and 12 254508mm at the back of the wine cooler to ensure proper air circulation to cool the compressor and condenser Also be sure to not obstruct the front exhaust vent with any objects as this may affect the unit from performing properly For freestanding installation leave 6 of space at the back 1012 of space on each side and unlimited clearance at the top of the beverage cooler are suggested to ensure proper air circulation to cool the compressor and condenser Do not place underneath a table counter top or anything of the sort as this will not allow for proper air circulation Do not slide the unit into place Place the wine cooler on a level surface strong enough to support it when it is fully loaded To level the wine cooler adjust the front leveling legs at the bottom of the wine cooler For best performance it is recommended that you install the appliance in a location with an ambient temperature between 7278F If the ambient temperature is above or below recommended temperatures the performance of the unit may be affected It is recommended that you do not install the appliance near an oven radiator or other heating source Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption Dont install in a location where the temperature will fall below 60F 16C For best performance do not install the appliance behind a cabinet door or block the base grille Avoid locating the unit in moist areas Plug the beverage cooler into an exclusive properly installedgrounded wall outlet INSTALLING THE STAINLESS HANDLE This wine cooler includes a stainless handle that is not required to operate this unit To install the handle please follow the below instructions ① Pull away the door gasket in the area where the handle is to be installed You can see two designated holes for handle installation The gasket is easily displaced by hand no tools are necessary ② Install the handle tightly as shown below with the two screws lock washers and flat washers provided DO NOT over tighten as this will cause damage to the handle assembly and stainless steel surface of the glass door ③ Replace the door gasket to its original position
• Page 9 - English - : OPERATING YOUR WINE COOLER The controls of your wine cooler POWER OFFON To turn the appliance ON or OFF touch the and marks at the same time for 5 seconds SET To set or view the internal temperature setting for each zone LIGHT To control the interior light turn onoff UP Press to raise warm the set temperature by 1C or 1F DOWN Press to lower cool the set temperature by 1C or 1F FC Selector Select the temperature display setting in Fahrenheit or Celsius degree To change the temperature from Fahrenheit to Celsius or from Celsius to Fahrenheit touch and hold mark for 5 seconds KEY LOCK After 2 minutes of inactivity the controls will be locked automatically To release the lock touch the UP and DOWN at the same time for 5 seconds TEMPERATURE ZONES The wine cooler has two temperature zones with a temperature range of 4072F The recommended temperature setting for each zone is Lower Zone between 5572F Ideal for red and white wines Upper Zone between 4055F Ideal for sparkling and white wines NOTE The temperature set for the Lower Zone must always be the same or higher than the temperature set for the Upper Zone For optimal performance the set temperature of the two zones should differ by at least 4F It is also normal for the temperature of the air inside the unit fluctuate by plusminus 7F If it fluctuates any more than 7F please contact customer service SETTING A TEMPERATURE Touch SET to set the internal temperature for each zone The degrees indicators will appear in the display window marked for UPPER ZONE and for LOWER ZONE When you touch SET for the first time the LED readouts will show the original temperature settings preset
• Page 10 - English - : factory setting for UPPER ZONE is 50F 10C and for LOWER ZONE is 60F 16C Touch SET once The left LED indicator for UPPER ZONE will flash Then touch UP or DOWN to set the desired temperature When you touch SET again the right LED indicator for LOWER ZONE will flash Then proceed to touch the UP or DOWN to set the desired temperature for the LOWER ZONE The temperature will increase by 1C or 1F if you touch UP once or the temperature will decrease by 1C or 1F if you touch DOWN once To view the set temperature in either zone at any time touch UP or DOWN and the set temperature will temporarily flash in the LED display for 5 seconds You can touch SET to view the temperature setting from one zone to the second zone NOTE When using the unit for the first time or after a long period of inactivity there may be a variance of a few degrees between the selected temperature and the temperature indicated on the LED readout This is normal due to the length of inactivity and will correct itself after the unit is run for a few hours If the unit is unplugged has lost power or is turned off wait 3 to 5 minutes before restarting the unit The unit will not restart before this time delay STORING WINE While bottles may vary in size and dimension this wine cooler is designed for standard Bordeaux 750ml bottles that are approximately 118 inches in lengthheight You can place 77 standard bottles in the upper zone with 11 bottles on each shelf and 78 standard bottles in the lower zone with 11 bottles on each fullsize shelf and 6 bottles on each halfsize shelf Approximate wine cooler capacity us 155 bottles Replace the door gasket to its original position NOTE When bottles on bottom shelf cannot be longer than approximately 12 inches SHELVES To avoid damaging the door gasket ensure that the door is fully opened when pulling the shelves out of the rail compartment The slideout shelves allow bottles of wine to be viewed and removed more easily Any of the shelves can be removed to store larger bottles For easy access to the storage bottles you must pull the shelf approximately 13 out of the rail compartment however this unit was designed with a plastic post on each side of the shelf track to prevent bottles from falling When removing the shelf from the rail compartment make sure to remove all items first Then move the shelf to the position where the notch of the shelf is exactly under the plastic post and lift the shelf In order to replace the shelf repeat steps described above in reverse DOOR LOCK The wine cooler comes with a lock and key combination The keys are located inside the plastic bag containing the Owners Manual To unlock the door insert the key into the lock and turn it counterclockwise To lock the door insert the key and turn it clockwise ensuring that the metal pin is fully engaged
• Page 11 - English - : CARE AND MAINTENANCE CLEANING YOUR WINE COOLER Turn off the power unplug the appliance and remove all items including shelves Wash the inside surfaces with a warm water and baking soda solution The solution should be about 2 tablespoons of baking soda to a quart of water Wash the shelves with a mild detergent solution Wring excess water out of the sponge or cloth before cleaning control panels or any electrical parts Wash the outside cabinet with warm water and mild liquid detergent Rinse well and wipe dry with a clean soft cloth IMPORTANT Always unplug the unit before cleaning or performing maintenance Never use harsh cleansers or scouring pads to clean any part of the unit DEFROSTING The unit defrost automatically The evaporator behind the rear wall of the unit defrosts automatically The condensate collects in the drainage channel behind the rear wall of the unit and flows through the drainage hole into the drip tray by the compressor where it evaporates POWER FAILURE Most power failures are corrected within a few hours and should not affect the temperature of your appliance If the power is off for an extended period of time proper steps should be taken to protect your contents INACTIVITY If the unit will not be used for a period of less than three weeks leave the cooler operating If the period of inactivity is several months remove all items and turn the unit off Clean and dry the interior thoroughly Leave the door open slightly to prevent any possible moisture buildup MOVING YOUR WINE COOLER Before moving your wine cooler first be sure to remove all items from the cooler Securely tape down any loose items such as shelves inside the unit Turn the adjustable leg up to the base to avoid damage Tape the door shut Ensure that the unit stays securely in the upright position during transportation Protect the outside of the appliance with a blanket or similar item ENERGY SAVING TIPS The unit should be located in the coolest area of the room away from heat sources or direct sunlight Ensure that the unit has proper allowances on all sides for proper ventilation Never cover any air vents Only open the cooler door for as long as necessary Frequent opening of the door will affect internal temperature Failure to unplug the appliance could result in electrical shock or personal injury
• Page 12 - English - : PROBLEMS WITH YOUR WINE COOLER You can solve many common wine cellar problems easily saving you the cost of a possible service call Try the suggestion below to see if you can solve the problem before contacting Vinotemp at InfoVinotempcom TROUBLESHOOTING PROBLEM POSSIBLE CAUSE Door will not close properly The wine cellar is not level The shelves are out of position The door gasket is dirty A bottle in the cellar is too long Wine cooler does not operate Ensure unit is plugged into the wall socketelectrical outlet Make sure the wall socket has power If outlet is controlled by a wall switch make sure switch is set to on Test wall socket functionality by testing another electrical appliance in the power socket Power is ON but the unit will not cool Make sure there are at least 3 to 5 bottles in the unit When using the unit for the first time it can take up to 24 hours to reach the desired temperature If the room temperature is at the high end of the ambient temperature range it may have more difficulty achieving a low internal temperature To achieve accurate temperature control the unit should not be used or operated in any of the following locations o In a sunny place a room with poor air circulation such as a garage or near another heatproducing appliance such as a dishwasher oven or refrigerator o With an outlet shared with a refrigerator as the refrigerator will drain power from the wine cellar Make sure the cooler has proper clearances at side and rear and is located in a wellventilated area Door is not closed tightly or is being opened too frequently Fan is always running This is simply a function of the cooling system The lower the setting the more the fan will run If the room is very warm the cooler will run more The unit has been designed to run continuously when operating at the lower temperatures Vibrations Check to make sure the wine cooler is level The rattling noise may come from the flow of refrigerant As each cycle ends you may hear gurgling noises caused by the flow of the refrigerant This is normal Contraction and expansion of the inside walls may cause popping and crackling noises Frost appears in cabinet on back Either too much humidity or too low of temperature inside cabinet Unplug cooler and allow to manually defrost Reconnect when ice has melted If problem persists contact for service instructions
• Page 13 - English - : Terms of Sale ShippingDelivery fees are the responsibility of the Purchaser Seller is not responsible for the carriers missedNon delivery for any reason Delivery is curbside Optional upgrades in delivery service is an additional fee If upgraded delivery service cannot be performed properly Purchaser agrees to accept delivery curbside and the difference in upgraded cost will not be refunded If item with free shippingfreight is canceled in transit a charge of 25 of the price of the units plus freight costs both ways will be charged All damages must be noted at time of delivery on BOL and Seller to be notified within 48 hours of delivery of such damage Purchaser acknowledges if cancelation is authorized by Seller a 35 restocking fee and freight both ways will be charged No cancelation or refund on made to order products If an order has been placed and production has not started cancellation fee of 15 of total amount will be charged Cancelled orders paid by Credit Card will have an additional fee of 3 deducted from the total refund Refurbished units are sold as is Purchaser assumes risks to the quality and performance of goods and assumes the costs of all necessary service or repair not covered herein Box here for check mark Accept Terms amp Conditions Vinotemp International Corp Seller and the person or entity that acquires these goods from Seller Purchaser hereby fully agrees to the following terms and conditions of the sale ShippingDelivery fees are the responsibility of the Purchaser whether freight prepaid or freight collect Seller assumes responsibility for the goods sold to the Purchaser until the goods have reached Purchasers delivery address FOB Destination and the delivery receipt is signed clear Seller is not responsible for the carriers late delivery missed delivery unpaved roads remote locations stairs elevators narrow door openings and other such issues in attempting to fit or deliver the goods into the Purchasers location Delivery to remote locations may require additional fees Remote location may be defined at the discretion of the carrier as more or less than 50 miles from the nearest major city Purchaser assumes all responsibility for additional costs related to freight such as access measurement installation hookup wiring moving and storage of the goods flight of stairs carriers inability to safely andor adequately deliver inability to use the building elevator to lift the goods narrow openings along with any additional costs to deliver or redeliver the product properly Make sure to review access to the property and size of the product ordered The transportation of all goods is subject to the terms Wine cooler turns on and off frequently The room temperature may be hotter than normal Check if door does not close completely or is open too often Check if door gasket does not seal properly The temperature control is not set correctly Inside light flashes In some instances this is normal The light may flash when the automatic defrost function starts to work Set temperature is higher than inner temperature Adjust temperature to resolve Display shows EL or EH The air temperature sensor in the corresponding temperature zone has failed
• Page 14 - English - : and conditions which the carrier imposes on Purchaser Installation is the responsibility of the Purchaser If white glove delivery was ordered and cannot be performed properly or access is hindered in any way Purchaser agrees to accept delivery curbside delivery service cannot be refunded If Purchaser willcalls or pays for their own freight responsibility transfers to the Purchaser when the Purchaser or Purchasers freight company picks up the unit from Seller Freight quoted are either curbside threshold or white glove Standard white glove delivery is main floor easy access and NO STAIRS Doors aligned feet attached if necessary and removal of packaging additional fees for additional requests Each service has a different rate and will require additional fees If freight is not charged Free Shipping or Freight Included and the order is cancelled after shipping a freight charge of 25 of the cost of the unit each direction will be charged Item swap outs are arranged as curbside delivery and pickup unless noted otherwise There is no white glove service for returns Approved returns must have original andor proper packaging Swapouts Delivery and Pick up are at the same time Original unit must be packed and ready for carrier pick up at time of delivery of new unit Packaging of old unit must be adequate for shipping not oversized or on a pallet if unit was not originally delivered on a pallet Carrier will not drop off new unit if the original unit is not ready If the carrier has to make a second attempt customer will be subject to additional charges for the attempted delivery and for any packaging issues Deliveries include ONE attempt by the shipping company to deliver the product to the consumer If for any reason the customer is unavailable to accept the order and the product is undeliverable under any circumstances the customer will be responsible for any extra shipping and handling charges We are a manufacturer not a shipping company deliveries are done by a 3rd party service Email us at infovinotempcom for a quote or any additional information Freight discussed is Continental USA excluding Alaska Puerto Rico Hawaii cost is additional please email infovinotempcom for a quote California Proposition 65 Warning The products sold on this ecommerce website and to the public may contain chemicals and other substances known to the State of California to cause cancer and birth defects and other reproductive harm Totes made of vinyl imitation leather andor leather material contain lead andor other substances that are known to the State of California to cause cancer birth defects and other reproductive harm Microfiber Plastic microfiber means a small synthetic particle that is fibrous in shape less than 5 millimeters in length and is released into water through the regular washing of textiles made from synthetic material Composite wood May contain formaldehyde Galvanized metal and some of its constituents contain lead andor other substances that are known to the State of California to cause cancer birth defects and other reproductive harm Products made of vinyl contain lead Diethyl Hexyl Phthalate DEHP andor other substances that are known to the State of California to cause cancer birth defects and other reproductive harm Acrylic may contain Acrylic Acid andor other substances that are known to the State of California to cause cancer birth defects and other reproductive harm Appliances may contain tin or lead in either the paint or the controllers andor other substances that are known to the State of California to cause cancer birth defects and other reproductive harm Our barware items may contain plastic acrylic enamel crystal metal andor other substances that are known to the State of California to cause cancer birth defects and other reproductive harm Appliances may contain Tin Lead or Nickel
• Page 15 - English - : Damage All damages must be noted at time of delivery If a bill is signed that there is no damage buyer accepts delivery as free and clear Any claim for damages of the goods when FOB Destination that incurred during shipment by the carrier are insured and handled directly with the carrier by the Seller if noted on the receipt and notified within 48 hours of delivery OPEN AND INSPECT YOUR DELIVERY When FOB Destination if the item is damaged by the freight company and Purchaser cancels rather than accepts a replacement the order can be cancelled by paying for freight costs both ways and a 35 restocking fee for stocked items No cancellation or refunds on custommade or made to order products When shipped 3rd Party FOB Warehouse Purchaser assumes all responsibility for delivery payment of freight and freight claims for damages during shipment Manufacture defects will be handled directly with Seller subject to the limited warranty below Fees All sales are final Unless authorized in writing by the Seller Purchaser may not return the goods under any circumstance If Seller agrees in writing to take back stocked goods there will be a restockingservice fee that is 35 of the purchase price of the goods and freight both ways product must be new unused and in original packaging If Purchaser returns goods claiming that the goods are defective and goods are found to be in working condition by the Seller Purchaser is liable for the cost of freight both ways plus and a service fee that is 35 of the purchase price of the goods Built to Order and Custom products are nonreturnable nonrefundable Purchaser must notify Seller of nonconforming goods within 48 hours of receipt after which time all goods are deemed accepted by the Purchaser If an order has been placed and production has not started cancellation of your order will be a 15 charge If Purchaser tenders payment with a check that has insufficient funds NSF a collection fee plus NSF fee of 50 will be added to the invoice which Purchaser agrees to pay promptly If Purchaser puts a stop payment on a check or credit card for any reason Purchaser agrees to pay for all costs associated with the Sellers collection or litigation of such a claim including without limitation general and special damages court costs and attorneys fees Finance charges begin the date of invoice Title to the goods reverts back to the Seller in the case of nonpayment of goods or services All fees and costs to retrieve the product cost of freight legal costs collection fees and court fees credit card fees and interest rate of 18 annual rate will be the responsibility of the Purchaser In a credit card dispute Purchaser assumes and must immediately pay any credit card arbitration fees and chargeback fees which the credit card companies charge at the time of the chargeback Cancelled orders using a Credit Card will have an additional fee of 3 deducted from the refund Any disputes not resolved within 30 days from the invoice date will be reported to credit reporting agencies LIMITED WARRANTY Seller warrants that the goods will be free of defects in materials and workmanship as follows Furniture style wood wine cabinets made in the US all cooling unit parts only for a period of 1 year year cabinetry and labor uninstalled for a period of 12 twelve Months Model numbers Vino and Custom Metal cabinet units appliances compressor made in China and DenmarkModel numbers start with EL VT IL or EP parts and labor for cooling system and cabinetry for a period of 12 twelve months Thermoelectric Units 90 ninety days including Wine and Beverage Coolers Beer Dispensers Humidor Portofino Wood Cellars and Refrigerators Models start with EL VT IL or EP WineMate and Cellar Tec WM Wine Mate or CTWine Cooling Units Split and Ducted Systems and other
• Page 16 - English - : installed cooling units are parts only for 1 year no labor Self Contained WineMate Cooling Systems are 1 year parts 1 year labor Removal and reinstallation of cooling units is not included Wine Accessories Racking Systems Parts and Other miscellaneous items is a 30 day warranty Il Romanzo units Warranty 90 ninety days Replacement part 12 twelve months from the date of sale Brama 1 year warranty from date of purchase NonNew Units Scratch amp DentRefurbishedFloor Models warranty for compressor units is 90 days from your dated invoice and 30 days for thermoelectric units parts for function only not cosmetic defects These units are refurbished and sold as is Purchaser assumes risks to the quality and performance of goods and assumes the costs of all necessary service or repair not covered herein Extended warranties via New Leaf may not be purchased on NonNew Units Delivery is curbside Upgrades in delivery will require an additional fee Element Grills via Element Products LLC grills have a thirty day limited parts warranty on grill accessories If a model is not listed here will have 90 day warranty on parts only if its a new item Parts and Repairs Warranty on inhouse repairs 90 days parts and labor for compressor 30 days parts and labor for Thermoelectric Customer is required to put down a labor deposit of 75 for Thermoelectric units 150 for compressor based Wine Coolers and 195 for WineMate units which will be kept if a unit is found to be in good working condition Customer is responsible for freight costs to us Warranty on parts purchased 30 days if part fails within 30 days of purchase customer is to ship us back the part upon inspection if defective VT will send replacement part at no charge If a purchaser claims a product is defective with regards to refrigeration Purchaser must obtain a letter from a qualified refrigeration technician at the Purchasers cost to verify that the unit was installed properly with proper ventilation and the unit is truly malfunctioning due to a manufacturing defect Removal or reinstallation of a unit is not included in warranted costs Purchasers exclusive remedy is limited at Sellers option to repair or replace defective parts with either new or reconditioned parts Purchaser is responsible for shipping the unit prepaid to a designated facility and Seller will pay return shipping charges in the continental United States for items repaired under warranty within 12 twelve months from date of sale The returned unit must be packaged correctly with enough protection to ensure the unit is not further damaged Oversized or lack of packaging is not permitted and will be refused Replacement or exchanged units will be returned to Purchaser through curbside delivery only Any redelivery fees are the Purchasers responsibility Since the natural variation in texture density grain color tone and shade of wood is unavoidable Seller does not guarantee the texture color tone or shade of the wood nor does seller guarantee the colorfastness of wood or against peeling chipping cracking or scratching Note Unfinished wood is subject to warping all wood surfaces must be sealed before placing cellar into service Make sure doors are aligned by reviewing the owners manual Improper repair or placement of the unit will void the warranty Any third party repair facility must be preapproved in writing by Seller before providing replacement parts under warranty Change Orders Custom units already in production that require a change will be subject to a change order fee
• Page 17 - English - : Storage Fees When having an item serviced by a Vinotemp service technician at the Vinotemp facility Purchaser agrees to pick up their repaired item or make arrangements for return shipping within a 30 day period once they have been notified by Vinotemp through phone call email or letter that their unit is ready for pick up If the item remains in the Vinotemp warehouse after 30 days but no longer than 60 days the Purchaser will incur additional storage fees of 2 After 60 days in storage the item will become property of Vinotemp For custom units with deposits If product is not picked up or shipped within 60 days of completion Purchaser deposit is forfeited and product becomes the property of Vinotemp Warranty period is from the date of sale not from shipping delivery nor installation All completed cabinetry racking or other custom work must be picked up or shipped within a period of 14 days after Vinotemp has notified the Purchaser by phone call email or letter Any completed cabinetry racking or other custom work stored longer than 14 days will incur an additional monthly storage fee After 60 days the product will become property of Vinotemp This Limited Warranty does not cover damage due to such things as accident misuse abuse mishandling neglect acts of God fires earthquakes floods high winds government war riot or labor trouble strikes lockouts delay of carrier unauthorized repair or any other cause beyond the control of the Seller whether similar or dissimilar to the foregoing Seller is not responsible for any damages caused to Purchasers property resulting from the goods This limited warranty applies only inside the Continental US Alaska Puerto Rico Hawaii and other territoriescountries are not warranted Purchaser understands and acknowledges that the goods sold here are wine cellars cigar humidors andor other similar units which house wine or cigars or other items Purchaser assumes all risk of using these units including risk of spoilage humidity variations temperature variations leaks fire water damage mold mildew dryness and similar and any other perils that might occur Seller is not responsible for incidental or consequential damages and there are no warranties expressed or implied which extend beyond the Limited Warranty described above Warranty and liability are nontransferable The implied warranties of merchantability and of fitness for a particular purpose are hereby expressly disclaimed Some states do not allow the exclusion of incidental or consequential damages or a waiver of the implied warranties of fitness andor merchantability so the above limitations may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state Seller disclaims any indemnification for claims of infringement of any intellectual property of protectable nature In the event of any dispute between Seller and Purchaser arising out of or relating to these terms and conditions or to the goods sold generally Purchaser must first file a written claim with Seller within ten days of the occurrence giving rise to the claim and wait an additional thirty days for a response before initiating any legal action The sale and all terms are subject to Nevada law Any legal proceeding arising out of or relating to these terms and conditions or to the goods sold Purchaser shall bring solely and exclusively in Clark County In no event may Purchaser initiate any legal proceeding more than six months after the occurrence of the event giving rise to the dispute Seller may make nonpayment claims until debt is paid in full Any dispute or claim relating in any way to these to the Terms and Conditions the Website or any products or services sold or distributed by or through this Website store or catalog will be resolved by binding arbitration rather than in court except that you may assert claims in small claims court if your claims qualify The Federal Arbitration Act and federal arbitration law apply to the Terms and Conditions We each agree that any dispute resolution proceedings will be conducted only on an individual basis and not in a class consolidated or representative action If for any reason a claim proceeds in court rather than in arbitration we each waive any right to a jury trial Both parties agree to bring suit in court to enjoin infringement or other misuse of intellectual property rights
• Page 18 - English - : The above terms and conditions are the only ones governing this transaction and Seller makes no oral representations of any kind These Terms and Conditions can only be modified in writing signed by both Purchaser and Seller SPECIFIC WARRANTY BELOW for SCRATCH amp DENTOPEN BOX REFURBISHEDFLOOR MODELS CLOSEOUTS OVERSTOCK TERMS AND CONDITIONS OF SALE Vinotemp and its brands Element Wine Mate Cellar Tec Apex Wine Racks Epicureanist Il Romanzo BramaSeller and the person of the entity that acquires these goods from Seller Purchaser hereby fully aggress to the following terms and conditions of the sale 1 Freight Vinotemp is not a freight moving or installation company if Freight is arranged for the Buyer the Seller assumes no responsibility for the goods sold to the Purchaser once the goods have left the Sellers premises including but not limited to late delivery by the moving carrier or for events caused by any difficulty carrier incurs in attempting to fit the goods into the Purchasers place of business or residence due to the size of the goods or otherwise such as the disassembly and reassembly of the goods Purchaser assumes all responsibility for delivery payment of freight extra fees access measurement installation hookup moving and storage of the goods The transportation of all goods is subject to the terms and conditions which the moving carrier imposes on Purchaser including but not limited to additional charges imposed per flight of stairs andor additional charges resulting from the carriers inability to safely andor adequately use the building elevator to lift the goods to an upper floor Any claim for damages incurred during shipment by the carrier of the goods are insured and handled directly with the carrier and must be noted at time of delivery 2 All sales are final and unless authorized in writing by the Seller Purchaser is not entitled to return goods under any circumstances If Purchaser refuses to accept goods the Purchaser is liable for the return and cost of freight both directions and a restockingservice fee that is 35 of the purchase price of the goods Purchaser must notify Seller of nonconforming goods within four days of delivery after which time all goods are deemed accepted 3 If Purchaser tenders payment with a check that has insufficient funds NSF or stops payment on a check or credit card for any reason Purchaser agrees to pay for all costs associated with the Sellers connection or litigation of such a claim including without limitation extra damages court costs collection fees and attorneys fees Finance charges begin the date of invoice Collection fees plus NSF fee of 50 will be added to your invoice which you agree to promptly pay Title to the goods does not pass until payment is received in full by Seller and Seller retains a security interest in the goods until they are paid for in full If the credit card dispute goes to arbitration Buyer agrees to pay for credit card arbitration fees 4 LIMITED WARRANTY on NonNew Units Scratch amp DentRefurbished and Floor Models warranty for compressor units is 90 days from your dated invoice and 30 days for thermoelectric units parts for function only not cosmetic defects These units are refurbished and sold as is Purchaser assumes risks to the quality and performance of goods and assumes the costs of all necessary service or repair not covered herein Wine Accessories Racking Systems and other items not mentioned are not warranted There is no warranty on parts purchased separately Removal and re installation of unit is not included in warranted labor Purchasers exclusive remedy is limited at Sellers option to repair or replace defective parts with either new or factory reconditioned parts Purchaser is responsible for shipping the unit prepaid to designated facility and Seller will pay return
• Page 19 - English - : shipping charges in the continental United States for items repaired under warranty Since the natural variation in texture density grain color tone and shade of wood is unavoidable Seller does not guarantee the texture color tone or shade of the wood nor does seller guarantee the colorfastness of wood or against peeling chipping cracking or scratching Note Unfinished wood is subject to warping all wood surfaces must be sealed before placing cellar into service Improper placement of the unit will void the warranty By Vinotemp in writing any 3rd party repair facility must be pre approved before providing parts free of charge 5 Freight If AsIs unit is shipped including freight and delivery is denied customer is responsible for freight to and from buyer Other costs Buyer is responsible for is storage repackaging and attempted delivery fees 6 Vinotemp does not cover damage due to such things as accident misuse abuse mishandling neglect acts of God fires earthquakes floods high winds government war riot or labor trouble strikes lockouts delay of carrier unauthorized repair or any other cause beyond the control of the Seller whether similar or dissimilar to the foregoing Seller is not responsible for any damages caused to Purchasers property resulting from the good This limited warranty applies only inside the Continental US Alaska Puerto Rico and Hawaii are not warranted 7 Purchaser understands and acknowledges that the goods sold here are wine coolers appliances cigar humidors andor other similar units which may house wine or cigars or other consumables Purchaser assumes all risk of using these units including risk of spoilage humidity variations temperature variations leaks fire water damage mold mildew dryness and similar perils that might occur 8 UNLESS OTHERWISE PROVIDED BY APPLICABLE LAW SELLER IS NOT RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES AND THERE ARE NO WARRANTIES EXPRESS OR IMPLIED WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF WARRANTY AND LIABILITY ARE NONTRANSFERABLE THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY EXPRESSLY DISCLAIMED SELLER DISCLAIMS ANY INDEMNIFICATION FOR CLAIMS OF INFRINGEMENT OF ANY INTELLECTUAL PROPERTY OF PROTECTABLE NATURE 9 In the event of any dispute between Seller and Purchaser arising out of or relating to these terms and conditions or to the goods sold generally Purchaser must first file a written claim with Seller within thirty days of the occurrence giving arise to the claim and wait an additional thirty days for a response before initiating any legal action Any legal proceeding arising out of or relating to these terms and conditions or to the goods sold generally shall be brought solely in Clark County The prevailing party in any such proceeding is entitled to its attorneys fees and costs In no event may Purchaser initiate any legal proceeding more than six months after the occurrence of the event giving rise to the dispute 10 Delivery is curbside Upgrades in delivery will require an additional fee The above terms and conditions are the only ones governing this transaction and Seller makes no oral representations of any kind These Terms and Conditions can only be modified in writing signed by both Purchaser and Seller 02052019
• Page 20 - English - : SERVICE amp IMPORTANT NOTICE Upon receipt and inspection of unit the supply cord must be replaced if it is damaged Contact our customer service at 18007778466 or infovinotempcom The manufacturer has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice WARNING Please do not place the unit within reach of children For adult use only Contact infovinotempcom with any questions or visit wwwvinotempcom 732 S Racetrack Road Henderson NV 89015 wwwvinotempcom Vinotemp is a registered trademark of Vinotemp International All products features and services are subject to change without notice We cannot guarantee the accuracy of the contents of this document We disclaim liability for errors omissions or future changes 2020 Vinotemp International All rights reserved