User Manual Furrion C-FACR15SA-A01 Chill conversion kit for ColemanDometicAdvent Air distribution box

Documents for Furrion C-FACR15SA-A01

The following documents are available:
User Manual Photos
C-FACR15SA-A01 photo

User Manual

For C-FACR15SA-A01.

Conversion kit / Installation Instructions
Model: C-FACR15SA-A01
What's in the box
Installation
1. Follow the Furrion rooftop installation
instructions to prepare the RV roof opening
and install the rooftop unit onto the RV roof.
The recommended roof thickness is 3~6"
(75~152mm).
Roof
Opening
14¼”
(362mm)
14¼”
(362mm)
6"
6"
(152mm)
2. Install the four conversion brackets onto the
bottom of the rooftop unit as shown in Fig. 1
and fix with 4 short bolts provided.
Fig. 1
The Scope of this manual is to support the installation of your new Furrion rooftop
unit with your existing Air Distribution Box unit and control using the Furrion universal
conversion kit.
3. Replace existing metal bracket and
duct divider, per existing installation
requirements. Be sure to seal any gaps an
openings with aluminum foil tape.
4. In case you need to connect the Furrion
rooftop to an other brand Air Distribution
Box (ADB), Furrion provides a wire adapter
in the conversion bracket packaging as an
option. (Fig. 2) Always adjust the thermostat
to the lowest temperature when the 'FAN'
mode is selected.
Roof Opening
115VAC
Power Cord
Rooftop Unit
Cable
Ceiling Thickness
Control Box
Fig. 2
5. Refer to the existing trim kit installation
manual to install the trim kit onto the RV roof
and secure with the 4 long bolts provided.
NOTE: Furrion provides 4¾" (121mm)bolts as
default, refer to the table below to cut or buy new
bolts from you local store when different length
of bolts are required (manual version only).
ST¼-20
2¾”
3¾”
4¾”
Length Roof Thickness
2¾"(70mm) 3~4" (76~102mm)
3¾"(95mm) 4~5" (102~127mm)
4¾"(121mm) 5~6" (127~152mm)
IG-FHA00009 V2.0
Furrion Innovation Center & Institute of Technology
52567 Independence Ct., Elkhart, IN 46514, USA Toll free:1-888-354-5792
©2007-2019 Furrion Ltd. Furrion
®
and the Furrion logo are trademarks licensed for
use by Furrion Ltd. and registered in the U.S. and other countries.
FURRION.COM
Component Description Quantity
Conversion Bracket 4
Bolt
ST¼-20, 4¾"(121mm) long
4
Bolt
ST¼-20, 2"(51mm) long
4
Wire Adapter 1
Installation Instructions 1