Loading ...
Loading ...
Loading ...
EN
8
Switching ON/OFF
Switch the heater on by using the switch button (B). The “100%” Red LED on the panel of
the heater will light. The heater is now switched on at 100% of the rated power. The appli-
ance needs some time to reach operating temperature. If you want to work at 50% of the
rated power, press the button (B) again, the “50%” LED indicator will light and the heater
will work at 50% of the rated power. If you need to shutdown the heater, press the button (B)
again, all the red LED indicator will not light, the heater will stop heating.
Timer control
In order to switch on the device temporarily, you must first press remote control button (B)
to switch on the heater, the “100%” red LED on the heater’s panel will light. Now, you are
able to select 1 hour, 2 hours, 4 hours or no timing. Make your choice by repeatedly press-
ing remote control button (A). The blue LED on the heater’s panel will indicate which time
period was selected (1, 2 or 4 hours). If you want to switch off the device before the set
time has expired, you must press button (B).
A 250V/16A switch must be installed before the power outlet. When not in use, it
is recommended to switch off the power or pull out the plug.
Always switch off the device after use.
Note! The red LED indicator light turns off when the device is turned off. This
does not mean that the appliance has cooled down!
6 MAINTENANCE
If faulty, never try to repair the device yourself. Please contact the nearest ser-
vice specialist for help.
Never clean the device when it is switched on.
After use, always allow the device to cool down for at least 30 minutes before
touching it.
Regularly clean the device with warm water on a damp cloth. Do not use cleaning agents.
Do not spray water directly onto the appliance using a hose or high-pressure cleaner.
Regular cleaning is required in order to guarantee a long service life.
7 TROUBLE SHOOTING
Symptom Remedy
Power indicator(Figure 4)
off
1. Make sure the power cord connected with breaker correctly.
2. Turn on the main circuit breaker.
No heat Make sure the indicator of 50% or 100% is on.
Cannot control the de-
vice by remote
1. Make sure the distance between remote and device is less
than 4m and no barrier between the device and remote.
2. Make sure the receiver (Figure 4) is not covered.
3. Change the battery of the remote.
If any of the remedies above cannot solve the problem, please call local dealer
for maintenance.
manual thermoflow far infrared heater -en & fr.indd 8 2019/11/12 17:14
Loading ...
Loading ...
Loading ...