31-5000418 Rev. 0 07-19 GEA
RAB46B
Room Air Conditioner
Wall Sleeve for AJ Series
Built-In Models
Before you begin - Read these instructions completely
and carefully. IMPORTANT – OBSERVE ALL
GOVERNING CODES AND ORDINANCES. Note to
Installer – Be sure to leave these instructions with the
Consumer. Note to Consumer – Keep these instructions
with your Owner’s Manual for future reference.
NOTE:
Handle the wall sleeve carefully.
CRITICAL DIMENSIONS
Ceiling
“A”
“B”
“C”
Roomside
Outside
wall
“D”
)LQLVKHGÀRRURUWRSRIFDUSHW
NOTE: Care should be taken in location of electrical
supply entry in relationship to wall sleeve to ensure
access to power once the unit is installed.
Dimensions Recommended Installation Clearance
A
7RSRIZDOOVOHHYHWR¿QLVKHGFHLOLQJ´PLQ
B
3URMHFWLRQRIZDOOVOHHYHLQWRURRP´PLQ
,IPRUHWKDQ´RIZDOOVOHHYHSURMHFWVLQWR
the room, other support is recommended
C
3URMHFWLRQRIZDOOVOHHYHWRRXWVLGH´PLQ
D +HLJKWDERYH¿QLVKHGÀRRURUWRSRI
FDUSHW´PLQ
E /HIW5LJKWVLGHRIZDOOVOHHYHWRDGMDFHQW
ZDOO´PLQ
INSTALL WALL SLEEVE LEVEL FROM SIDE TO SIDE
AND WITH A SLIGHT TILT FROM FRONT TO REAR
NOTE: If an internal drain is to be used, install the
wall sleeve level from side to side and level from
front to rear.
WALL SLEEVE LOCATION
$VDJHQHUDOUXOHWKHDLUFRQGLWLRQHUVKRXOG
be located in an outside wall to ensure proper
distribution of conditioned air. It should be located
in a portion of the wall where there is no electrical
ZLULQJRUSOXPELQJDQGZKHUHWKHUHDUHQR
obstructions immediately inside or outside.
Outside wall
“E”
“E”
Top of case
Top of wall sleeve
Loading ...
Loading ...
Loading ...