Loading ...
Loading ...
Loading ...
Care of Pre-Cut Panels
(;lean these panels Llsin_ an anti-static ......cleaner or a l-nild deteroent
and water. ([,ook tor anti-static cleaner in electronic or computer deparunents.)
Rinse thoroughly and blot @)'with a clean, damp cloth or chamois. Do not use
paper towels to wash or d[7 the panels. Do not use cleaners that contain solvents,
such as ammonia, because the)can damage the panels.
Shall()w scratches and abrasions can be corrected with a good grade of hard
automobile paste wax. Do not use a cleaner/wax combination. The wax will
fill in any minor suriilce scratches and will help to maintain the luster of the
panels. Appl) the w_e_.sparingly and butt'lightl} with a clean ,,soft cloth usino-,
a cir(aflar motion.
Dimensions
Wood panels need to be cut to tile tollowing specifications.
Freezer Panel Freezer Panel
Without Dispenser With Dispenser Fresh FoodPanel
Cutout.... .3/32" Cutout_I I_ 3/32" 3/37".... Cutout
_1 _
I FRONT
34%"
@14VZ'
"2"
1"
!: t
FRONT
2"½ --19'q .......
Li L
Tile areas at tile top of the panels need
to be cut out of tile panels. All other
dotted lines indicate areas that must be
routed out about 3/16" (5 ram) on the
back side ot panels 1/4" (6 ram) thick
or more. For panels less than 1/4"
(6 ram) thick, these areas can be cut
out ot the filler panels,
_.___._i_ll, Depthof matedalto
be routedout
1 4 3/16
Front
Exampleof Routing
!!i'i !i
27 ......................................
Loading ...
Loading ...
Loading ...