Loading ...
Loading ...
Loading ...
Yournewtractorhasbeenassembledatthefactorywithexceptionofthosepartsleft
unassembledforshippingpurposes.Toensuresafeandproperoperationofyourtract
allpartsandhardwareyouassemblemustbetightenedsecurely.Usethecorrecttool.,
asnecessaryto insurepropertightness.Reviewthevideocassettebeforeyoubegin.
TOOLS REQUIRED FOR
ASSEMBLY
A socket wrench set willma_e assembly
easier. Standard wrench sizes you need
are listed below.
(1) 9/16" wrench
(1) 3/4" wrench
(2) 1/2" wrench
(1) Utility knife
(1)Pliers
(1) 3/4" Socket w/
drive rachet
(1) Phillips Screw-
ddver
(1) Tire pressure
gauge
When right or left hand is mentioned in
this manual, it means, from your point of
view, when you are in the operating posi-
tion (seated behind the steering wheel).
TO REMOVE TRACTOR FROM
CARTON
UNPACK CARTON
• Remove all accessible loose parts and
parts boxes froth shipping carton (See
page 6).
• Cut, from top to bottom, along lines on
all four comers of shipping carton, and
lay panels flat.
• Check for any additional loose parts or
boxes and remove.
BEFORE ROLLING TRACTOR OFF
SKID
ATTACH STEERING WHEEL
ASSEMBLE EXTENSION SHAFT AND
BOOT
• Slide extension shaft onto lower steer-
ing shaft. Align mounting holes in exten-
sion and lower shafts and install 5/16
hex bolt and Iocknut. Tighten securely.
IMPORTANT: Tighten bolt and nut secure-
lyto 18-22 ft. Ibs. torque.
• Place tabs of steering boot over tab
slots in dash and push down to secure.
Insert
_3_ 18a_gO_eF,kWa';her
Wt_eel
Extension
Shaft _ 5/_16Hex
5116 Locknut__'.
Lower Steering_ f_ "-"_ °-.
Sha. ," ,3} ' "
i
I t
INSTALL STEERING WHEEL
• Position front wheels of the tractor so
they are pointingstraight forward.
i Slide steering wheel adapter onto steel
ing shaft extension.
Position steering wheel so cross bars
are horizontal (left to right) and slide
inside boot and onto adapter.
• Assemble large fiat washer, 3/8 lock
washer, 3/8 hex bolt and tighten secure!
• Snap steering wheel insert into center
of steedng wheel.
• Remove protective materials from trac,
tor hood and grill.
IMPORTANT: Check for and remove any
staples in skid that may puncture tires
where tractor is to roll off skid.
8
Loading ...
Loading ...
Loading ...