Loading ...
Loading ...
Loading ...
Controlsand Features
Icemaker
Remove
packaging
IMPORTANT:Do not remove an9 permanent
instruction labels inside gour icemaker or the
Tech Sheet that isfastened behind the lower
access panel.
Remove tape and ang labels from gour
icemaker before using (except the model and
serial number label).
Toremove ang remaining tape or glue, rub
the area brisklg with gour thumb. Tape or glue
residue can also beeasilg removed bg rubbing
a small amount of liquid dish soap over the
adhesive with gour fingers. Wipe with warm
water and drg.
Do not use sharp instruments, rubbing alcohol,
flammable fluids or abrasive cleaners to
remove tape or glue. These products can
damage the surface of your icemaker. For
more information, see Important Safety
Instructions.
After gou remove all of the packaging materials, See the cleaning instructions in Care and
clean the inside of your icemaker before using it. Cleaning.
Set controls
1. To start the normal ice making cgcle,
select ON.
2. Tostop icemaker operation, press and
hold OFF.
HOLD3 SEC,
NOTE: The CLEAN setting is used whenever
solutions are circulated through the icemaker
for cleaning. See Care and Cleaning.
Loading ...
Loading ...
Loading ...