Loading ...
PREPARATION
Before beginning assembly, installation or operation of the product, make sure all parts are present. If any part is missing or
damaged, do not attempt to assemble, install or operate the product. Contact customer service for replacement parts.
Tools Required for Assembly (not included): Screwdriver, Phillips Screwdriver, Pliers, Electrical Tape, Wire Cutters, safety
Glasses, Ladder, Wire Stripper.
SAFETY INFORMATION
ASSEMBLY INSTRUCTIONS
WARNING
Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit
breaker).
Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires to contact any
surface having a sharp edge. To do so may damage or cut the wire insulation, which could cause serious injury or death from
electric shock.
CAUTION
All electrical connections must be in agreement with local codes, ordinances or the national electric code (NEC). Contact your
municipal building department to learn about your local codes, permits and or inspections.
Do not connect this fixture to an electrical system that does not provide a means for equipment grounding. Never use a fixture in
a two-wire system that is not grounded. If you are not sure your lighting system has a grounding means, do not attempt to install
this fixture. Contact a qualified, licensed electrician for information with regards to proper grounding methods as required by the
local electrical code in your area.
Please read and understand this entire manual before attempting to assemble, operate or install the product.
Loading ...