Model No.: CRL2101 BK
Before returning to your retailer, call our customer service at 1-888-722-5089
A
B
C
D
E
F
G
H
SKU No.: 351-8704
For customer service support and the fastest response, please email us at
dorothyewcc@hotmail.com or visit our website www.ewccusa.com
Margo 1 Light Semi-Flush Mount
Questions, problems, missing parts?
PACKAGE CONTENTS
H
I
J
K
L
HARDWARE AND PART CONTENTS Note: Hardware not shown actual size.
AA
PREPARATION
Before beginning assembly, installation or operation of the product, make sure all parts are present. If any part is missing or
damaged, do not attempt to assemble, install or operate the product. Contact customer service for replacement parts.
Tools Required for Assembly (not included): Screwdriver, Phillips Screwdriver, Pliers, Electrical Tape, Wire Cutters, safety
Glasses, Ladder, Wire Stripper.
SAFETY INFORMATION
ASSEMBLY INSTRUCTIONS
WARNING
Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit
breaker).
Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires to contact any
surface having a sharp edge. To do so may damage or cut the wire insulation, which could cause serious injury or death from
electric shock.
CAUTION
All electrical connections must be in agreement with local codes, ordinances or the national electric code (NEC). Contact your
municipal building department to learn about your local codes, permits and or inspections.
Do not connect this fixture to an electrical system that does not provide a means for equipment grounding. Never use a fixture in
a two-wire system that is not grounded. If you are not sure your lighting system has a grounding means, do not attempt to install
this fixture. Contact a qualified, licensed electrician for information with regards to proper grounding methods as required by the
local electrical code in your area.
Please read and understand this entire manual before attempting to assemble, operate or install the product.
Turn off the power at fuse or circuit box.
CARE AND MAINTENANCE
Step 1: Unscrew (2) Ball Nuts (D) from the Lamp Body (E) and take the Mounting Bracket (A) off.
Step 2: Mount the Mounting Bracket (A) to outlet box using Mounting Screws (B).
Make sure the screws on the Mounting Bracket (A) are facing out from the outlet box.
Step 3： Wrap the ground wire from the fixture around the ground screw on the Mounting Bracket (A), then connect
to the ground wire from the outlet box with a Wire Nut(C).
Connect the black wire from the fixture to the black wire from the outlet box with a Wire Nut (C).
Connect the white wire from the fixture to the white wire from outlet box with a Wire Nut (C).
Note: Wrap the Wire Nuts (C) with electrical tape for a more secure connection.
Carefully tuck wires and Wire Nuts (C) into the outlet box
Step 4：Position the fixture over screws on Mounting Bracket (A) and secure fixture in place with Ball Nuts (D)
Step5: Insert the Crystal Drop (F) and Crystal Drop (G) alternately into the 3 layers of the frame as diagram. Make sure two
drops should be alternately aligned in each layer. And the beginning drop of the bottom layer should be different from the one
above the layer.
Step 6：Install the Bulb (H)(Bulb is not included) into the Socket. Be sure to use Bulb(H )with wattage no greater than specified
on this fixture. Make sure that electrical current is turned off before changing bulbs.
• Use a dry soft cloth to dust the surface.
• Do not clean with abrasive materials, bleach, or solvents.
Problem: The light does not come on at all.
a) Ensure the power supply is turned on.
b) Verify that bulb is installed correctly.
c) Ensure the circuit breaker is set in the “ON” position.
FIVE-YEAR LIMITED WARRANTY: If, during normal use, this PATRIOT LIGHTING
®
lighting fixture breaks or fails
due to a defect in material and workmanship within five (5) years from the date of original purchase, simply bring this lighting
fixture with the original sales receipt back to your nearest MENARDS
®
retail store. At its discretion, PATRIOT LIGHTING
®
agrees
to have the product or any defective part(s) repaired or replaced with the same or similar PATRIOT LIGHTING
®
product or part
free of charge, within the stated warranty period, when returned by the original purchaser with original sales receipt. This
warranty; (1) excludes expendable parts including but not limited to light bulbs; (2) does not cover damage that has resulted from
abuse or misuse; and (3) does not cover any losses, labor, injuries to persons/property or costs. This warranty does give you
specific legal rights and you may have other rights,which vary from state to state.
TROUBLESHOOTING
