Loading ...
Loading ...
Loading ...
Screws
Left HandMandrel_
Cover
Idler
Pulleys
Spring
Electric
Clutch
Pulley
Boltin
, Mower
Left
Hand
Mandrel
Mower
Drive Belt
Belt
Keepers
TO REPLACE MOWER BLADE DRIVE •
BELT
Park the tractor on level surface. Engage •
parking brake,
• Remove mower drive belt (See 'q'O
REPLACE MOWER DRIVE BELT" in
this section of this manual).
• Remove mower (See 'q-O REMOVE •
MOWER" in this section of this
manual).
• Remove screws from R.H. mandrel
cover and remove cover. Unhook
spring from bolt on mower housing.
• Carefully roll belt off R.H. mandrel •
pulley.
• Remove belt from center mandrel
pulley, idler pulley, and L.H. mandrel
pulley, °
• Remove any dirt or grass which may
have accumulated around mandrels
and entire upper deck surface.
Mower Blade
Drive Belt
Mandrel
Check secondary idler arm and idler to
see that they rotate freely.
Be sure spring is hooked in secondary
idler arm and sway-bar bracket.
Install new belt in lower groove of L.H.
mandrel pulley, idler pulley, and
center mandrel pulley as shown.
Roll belt over R.H. mandrel pulley.
Make sure belt is in all grooves
i_lroperly•
econnect spring to bolt in mower
housing and reinstall R.H. mandrel
cover.
Reinstall mower to tractor (See
"INSTALL MOWER AND DRIVE BELT"
in the Assembly section of this
manual).
Reassemble mower drive belt (See
"TO REPLACE MOWER DRIVE BELT"
in this section of this manual).
Mandrel
Mandrel Cover
Idler Arm
Idler
Anit-Sway Pulley
Bar Bracket
25
Loading ...
Loading ...
Loading ...