Craftsman 917273061 50" MOWER AUTOMATIC GARDEN TRACTOR

Owner's Manual - Page 18

For 917273061.

PDF File Manual, 64 pages, Read Online | Download pdf file

917273061 photo
Loading ...
Loading ...
Loading ...
Sitting in the tractor seat, start engine.
After the engine is running, move
throttle control to half (1/2) speed. With
motion control lever in neutral (N)
position, slowly disengage clutch/
brake pedal.
Slowly move motion control lever
forward, after the tractor moves
approximately five (5) feet, slowly
move motion control lever to reverse
position. After the tractor moves
approximately five (5) feet return the
motion control lever to the neutral (N)
position. Repeat this procedure with
the motion control lever three (3)
times.
Your tractor is now purged and now
ready for normal operation.
MOWING TIPS
Tire chains cannot be used when the
mower housing is attached to tractor.
Mower should be properly leveled for
best mowing performance. See "TO
LEVEL MOWER HOUSING" in the
Service and Adjustments section of
this manual.
The left hand side of mower should be
used for trimming.
Drive so that clippings are discharged
onto the area that has been cut. Have
the cut area to the right of the tractor.
This will result in a more even distribu-
tion of clippings and more uniform
cutting.
When mowing large areas, start by
turning to the right so that clippings will
discharge away from shrubs, fences,
driveways, etc. After one or two
rounds, mow in the opposite direction
making left hand turns until finished.
If grass is extremely tall, it should
mowed twice to reduce load and
possible fire hazard from dried
clippings. Make first cut relatively
high; the second to the desired heir
Do not mow grass when it is wet. W
grass will plug mower and leave
undesirable clumps. Allow grass to
dry before mowing.
Always operate engine at full throttl
when mowing to assure better mowin
performance and proper discharge of
material. Regulate ground speed by
selecting a low enough gear to give
the mowe, cutting performance as well
as the quality of cut desired.
When operating attachments, select a
ground speed that will suit the terrain
and give best performance of the
attachment being used.
18
Loading ...
Loading ...
Loading ...