Loading ...
Loading ...
Loading ...
Blind Hemming (Models 12781, 12681 and 12581)
SECTION 3. LEARN THE STITCHES
Set the Machine
Stitch Stitch selector
(Regular)
Top thread tension Stitch length
control 1 to 4 control 1 to 3
Zigzag foot
Set the Machine
Stitch Stitch selector
(Stretch)
Top thread tension Stitch length
control 1 to 4 control 1 to 3
_Zigzagfoot
Light
Weight
Fabric
1/4"
114"
Heavy
Weight
Fabric
_., - )
There are two blind hem stitches on your machine. The regular blind hem isused for woven fabrics. The stretch blind hem is
wider and will "give" and is usedfor knit and stretch fabrics.
1. Finish the raw edge of your hem any way you desired. (See Overcasting, p. 2__4)
2. Measure, turn up your hem and pin.
NOTE: For light weight fabrics, you may need a double fold.
3. Fold the material (wrong side out) on the edgeto be stitched, as shown, leaving 1/4" of the finished hem edgeshowing.
4. Place garment under presserfoot in such a manner that straight stitches will be sewn on extended edge. The zigzag stitch,
....... should just catch the fold of the garment .....
5. After hemming, pressboth Sidesof the finished hem: The top Sideof the garment will show only the blind Stitches__
NOTE: The stretch blind hem stitch also can be usedfor Lace Work. (See p. 2.66)
27
Loading ...
Loading ...
Loading ...