Loading ...
Loading ...
Loading ...
5.0 Installation
Below countertop
5.1 Cut Hole
For hole cutting - see section 3.2
(if necessary)
For vented installations - see section 4.2
5.2 Cut Vent
(if necessary)
For washer installation - see section 3.4
5.3 Insert Washer
Carefully lift the U-Chill
TM
from the box using
two hands
Align logo to desired position
Lower slowly into hole
Push down evenly on top of the crown until
ush with the countertop, clearing any
protective lm
5.4 Align & Lower U-Chill
TM
Plug the U-Chill
TM
into the supplied 12V
power adapter
Once the product detects power, it will turn on
automatically
The U-Chill
TM
will automatically go into standby
after 4 hours without use
To turn on during standby, simply touch
the crown
5.6 Power On & Enjoy!
Twist the clamp onto the U-Chill
TM
until it is
fastened tightly against the underside of the
countertop, making sure not to twist the logo
out of alignment.
5.5 Thread Clamp
Loading ...
Loading ...
Loading ...