Loading ...
Loading ...
Loading ...
6
Use & Care guide
FIRST TIME USE
DAILY USE
HOW TO USE THE APPLIANCE
ACCESSORIES
POTS AND PANS
Only use pots and pans made from ferromagnetic
material which are suitable for use with induction
hobs. To determine whether a pot is suitable,
check for the
symbol (usually stamped on the
bottom).A magnet may be used to check whether
pots are magnetic.
The quality and the structure of the pot base can alter cooking
performance. Some indications for the diameter of the base do not
correspond to the actual diameter of the ferromagnetic surface.
EMPTY POTS OR POTS WITH A THIN BASE
Do not use empty pots or pans when the hob is on.
The hob is equipped with an internal safety system that constantly
monitors the temperature, activating the “automatic o” function
where high temperatures are detected. When used with empty pots
or pots with thin bases, the temperature may rise very quickly, and the
“automatic o” function may be triggered with a slight delay, damaging
the pot or pan. If this occurs, do not touch anything, and wait for all
components to cool down.
If any error messages appear, call the service centre.
NOOK
MINIMUM DIAMETER OF POT/PAN BASE FOR THE DIFFERENT
COOKING AREAS
120
100
220
MAXMINMED MAXMINMED MAXMINMEDMAXMINMED
OK
POWER CONTROL
With the “Power control” function, you can set the maximum power
level for the hob, based on your needs or on the capacity of your mains
power supply.
Once the maximum power has been set, the hob automatically adjusts
the charge distribution to the dierent cooking zones and an acoustic
signal will sound when the limit is reached.
This setting can be used at any time and will remain until it is changed.
At the time of purchase, the hob is set to the maximum possible power
(nL). The maximum power level (nL) is printed on the identication plate
on the bottom of the hob.
To set the hob power:
Once the appliance is connected to the mains power, the power level
can be set within 60 seconds.
• Press and hold down the
control for 3seconds. The display will
read
.
• Hold down the control
OK
until the last power setting is shown.
• Use the
and
controls to select the required power.
Available power settings are: 2.5kW – 4.0kW – 6.0kW – 7.4kW.
• Press
OK
to conrm.
The selected power will remain in the memory, even in the case of a
power outage.
To vary power levels, disconnect the appliance from the mains power
for at least 60seconds, then reconnect it and repeat the steps above.
In case of error during the setting sequence, the display will show the
symbol and an acoustic signal will be sounded. In this case, you will
need to repeat the operation.
If the error persists, contact the assistance service.
ACOUSTIC SIGNAL ON / OFF
To switch the acoustic signal on/o:
• Connect the hob to the power supply;
• Wait for the switch-on sequence;
• Hold down the
P
control on the rst slider to the left, for 3seconds.
Any alarms set will remain active.
3”
MAXMINMED
MAXMINMED
MAXMINMED
MAXMINMED
OK
SWITCHING THE HOB ON/OFF
To turn the hob on, press the power button for around 1 second, until
the cooking zone display lights up.
To turn the hob o, press the same button again, and all cooking zones
will be deactivated.
If no function is selected, the hob will automatically switch o after 10 seconds.
If the hob is being used, switching it o will switch o all cooking zones,
and the residual heat indicator, “H”, will remain lit until all of the cooking
zones have cooled.
POSITIONING
1. Locate the desired cooking zone, by referring to the position
symbols at the bottom of each slide touchscreen.
2. Place the pan in the chosen area, making sure that it covers one or
more of the reference marks on the surface of the hob.
3. Do not cover the control panel symbols with the cooking pot.
Loading ...
Loading ...
Loading ...