Loading ...
Loading ...
Loading ...
Installation Instructions
INSTALLING THE WATER LINE (CONT.)
[] PLUG IN THE REFRIGERATOR
__rranoe the coil ot tubing so that it does not _ibrate
against the back of the refrigerator or against the
wall. Push the refl'igerator back to the wall.
START THE ICEMAKER
Set the icemaker power switch to the I (on) position.
The icemaker will not begin to operate until it
reaches its operating temperature of 15°F (-9°C) or
below. It will then begin operation automatically if
the icemaker power switch is in the I (0/1)position.
NOTE: In lower water pressure conditions, the
water xalxe may turn on up to 3 times to delixer
enough water to the icemake_:
REVERSING THE DOOR SWING
IMPORTANT NOTES
_'hen re\'e_ing the door swing:
• Read the instructions all the way through befin'e
sta rting.
• Handle parts careflfllv to awfid scratching paint.
• Set screws down bv their related parts to aw)id using
them in the wrong places.
• Provide a non-scratching work surtace tk_r the doors.
IMPORTANT: Once you begin, do not move the
cabinet until doo>swi_g reversal is completed.
These instructions are for changing the hinges from
the right side to the left side>--if w_u ever want to change
the hinges back to the right side, follow these same
instt ucfions and reverse all reterences to left and right.
Unplug the refrigerator from its electrical outlet.
Empty all door shelves, including the dairy
compartment.
TOOLS YOU WILL NEED
Phillipsscrewdriver
Puttyknife or
thin-bladescrewdriver
5/16" Headsocketdriver
3/4" Headsocketdriver
(a6-pointsocketis
recommended)
Maskingtape
18
Loading ...
Loading ...
Loading ...