Loading ...
Loading ...
Loading ...
25
5. Insert the alarm signal wires through the hole in the rear panel and then through the hole in
the control box.
Recommended wire size: 16 AWG - 22 AWG
EXTERNAL ALARM DEVICE CONNECTION
6. Connect the alarm signal wires to terminal AL-1 and AL-2 and/or FA-1 and FA-2 as shown
in the figure.
7. Reinstall the rear panel so as not to pinch the wires between the control box flange and the
rear panel, and then reinstall the service panel.
OS-1
OS-2
FA-2
FA-1
AL-1
AL-2
Alarm Device 1
Alarm Device 2
Terminal Block
Hole in the Rear Panel
Route of Signal Wires
Terminal Block
Hole in the Control Box
Flange
Loading ...
Loading ...
Loading ...