Loading ...
Step 2
Step 4
Step 1
Step 2
Step 5
Step 6
Step 2
Step 7
Canopy
Nut
Attach the stem to the fixture. Install the rod and metal covers
against the stem by nut. Secure the glass in place using the
fibre washer hex nut, decorative cap and finial. Install proper
bulb type and wattage (not included).
Canopy
Nipple
Upper
Connector
Nut
White
Black
House supply
Ground wire
Fixture
Ground
wire
Upper
Connector
Nipple
Loosen the nut on the upper connector and slide it down the
chain towards the lower connector. Slide the canopy down the
chain towards the lower connector. Feed the wire through
nut, canopy, the upper connector and onto the nipple. Tighten
the upper connector onto the nipple. Spread the other end of
the chain open and fasten to the upper connector. Ensure the
opening is closed.
Connect the ground wires (bare copper or green) from your
fixture to the ground wire (bare copper or green) or ground
screw in the electrical outlet box. Connect the black wire (or
wire marked “SPT-1”) from the fixture to the black wire in the
electrical box and connect the white wire from the fixture to the
white wire in the electrical box.
Once connections of wires are completed, carefully tuck wires and
wire nuts into the outlet box making sure no bare wire (on the
black and white) is visible at the wire nuts. Slide canopy into
position and tighten in place by nut into position.
Imported By: CANARM LTD., 2157 Parkedale Ave., Brockville, Ontario, K6V 5V6, Tel: (613) 342-5424, Fax: (800) 263-4598
Glass
Decorative
Cap
Fibre Washer
Hex Nut
Rod
Small
metal cover
Big
metal cover
Finial
Bulb
Stem